Soldato
Not found a similar thread recently, this is mainly just a sanity check please...
The other day SS1 and SS3 started coming up with "no satellite signal is being received" with error number 25. Tried the initial obvious things like turning on and off, cleaning the viewing card - nothing.
Then began to investigate further, this has involved resetting the LNB from the hidden installation menu and updating the software (holding down back up whilst powering on). Still missing.
So, thought I'd check which other channels are on the same frequency - 12.110 H, these are FX and TCM2 - both there but breaking up. Channels on frequencies either side of this are fine. Could bad alignment cause just one frequency to disappear?
The other day SS1 and SS3 started coming up with "no satellite signal is being received" with error number 25. Tried the initial obvious things like turning on and off, cleaning the viewing card - nothing.
Then began to investigate further, this has involved resetting the LNB from the hidden installation menu and updating the software (holding down back up whilst powering on). Still missing.
So, thought I'd check which other channels are on the same frequency - 12.110 H, these are FX and TCM2 - both there but breaking up. Channels on frequencies either side of this are fine. Could bad alignment cause just one frequency to disappear?