Soldato
Hey all,
I finally got round to getting the STi remapped after owning it for over 2 years now. I previously ran at Powerstation in October 2009, where I got 330bhp and 280lb/ft torque with simply the PPP and my exhaust system. Graph below:
Yesterday I had the car mapped by RaceDynamix who does Opensource tuning as opposed to your usual ECUtek that most Subarus go for. I found the whole experience great fun. The mapper dialled in the wastegate control, boost targets etc, whilst going back and forth up a nice stretch of road until he was happy with where it was left.
So, fast forward to today, and a tank of fuel later, I'm at Powerstation for a power run. Below is the graph:
I made 372bhp and 335lb/ft torque, whilst being about 0.1 bar off the target boost! I believe thats around 110bhp over stock
I tried to do a quick and very rough overlay of the two results just so you can see the gains and that is below:
At first I didn't really feel the gains if I'm honest, but that was probably due to blasting it up and down a dual carriage way all morning, but since then boy have I noticed the difference, it pulls so much harder and cleaner! And there's some lovely pops and bangs on the overrun!
As always I took the liberty of making a video whilst at Powerstation (that's all my youtube channel is full of!)
And a quick dash up a slight incline
Just thought I'd share. Thanks for looking !
Kosta
I finally got round to getting the STi remapped after owning it for over 2 years now. I previously ran at Powerstation in October 2009, where I got 330bhp and 280lb/ft torque with simply the PPP and my exhaust system. Graph below:
Yesterday I had the car mapped by RaceDynamix who does Opensource tuning as opposed to your usual ECUtek that most Subarus go for. I found the whole experience great fun. The mapper dialled in the wastegate control, boost targets etc, whilst going back and forth up a nice stretch of road until he was happy with where it was left.
So, fast forward to today, and a tank of fuel later, I'm at Powerstation for a power run. Below is the graph:
I made 372bhp and 335lb/ft torque, whilst being about 0.1 bar off the target boost! I believe thats around 110bhp over stock
I tried to do a quick and very rough overlay of the two results just so you can see the gains and that is below:
At first I didn't really feel the gains if I'm honest, but that was probably due to blasting it up and down a dual carriage way all morning, but since then boy have I noticed the difference, it pulls so much harder and cleaner! And there's some lovely pops and bangs on the overrun!
As always I took the liberty of making a video whilst at Powerstation (that's all my youtube channel is full of!)
And a quick dash up a slight incline
Just thought I'd share. Thanks for looking !
Kosta




