• Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

The Fury(X) Fiji Owners Thread

I hope the 3rd parties get to grips with voltage control soon, Would actually like to see "The Overclockers Dream".

With custom waterblocks they are not bad at overclocking on stock volts, mine can all do 1140/500 when working together in a 4 way setup and better than that when used as single cards.

What voltage control will bring is the big unknown.
 
Had mine in for a couple of days now. When I first fired it up it had a terrible whine - really high pitch and loud. I was gutted.

I was prepared to send it back but I was curious how it performed so I had a session playing one heavily GPU bound game (Survarium) - 100% load for a couple of hours.

To my surprise by the time I was done the whine was gone. If I take the side panel off and put my ear right up to it I can still hear the whine but it's really a non-issue now. The pump is louder than the corsair H55 on my cpu but still it just sounds like a pump.

I don't know if it's settled down with a run in or if it's just killed off that part of my hearing range, but whatever, I'm happy :)

Don't forget to post pics to get on TROH.:)
 
Well, fitted mine today (after wrestling with my 900D, that's the last time you get me Corsair! Probably).
While I've not had too much time to really push them, the little bit of playing I have done didn't have any obvious signs of whine (yet).
The cards and fans were actually quieter than I had expected them to be with the Gentle Typhoons on, although they've not really been pushed for any length of time to build up an heat.

Not a big fan of the 900D case and will be giving mine away to one of my mates at work.

From now on I will be roughing it with my Little Devil cases, I have got 3 of them.
 
I got my Fury X a few weeks back, it had terrible pump whine, so i had to speed up my WC project, ofc the warranty lost but who cares :)

Few pics and please remove my Giga Ti from theirs honor wall thingy... :)

491520_img_20150813_145242_2.jpg


491520_img_20150904_202125.jpg
And in the loop:)

491520_img_20150906_174930.jpg
Images over 1,280 pixels wide should be placed in spoiler tags as I've done for you.

Cheers

Surveyor

Welcome and on TROH.:)

The Roll of Honour.


07/09/2015, Make Reference, Jonahun Link
24/08/2015, Make Reference, WeSbO Link
07/08/2015, Make Reference, Howling Link
05/08/2015, Make Reference, LoadsaMoney, Link
04/08/2015, Make Reference, Dicehunter, Link
30/07/2015, Make Reference, X3T, Link
29/07/2015, Make Reference, FredFlint, Link
24/07/2015, Make Reference, ALXAndy, Link
20/07/2015, Make Reference, Ash0787, Link
20/07/2015, Make Reference, phiiil, Link
05/07/2015, Make Reference, muziqaz, Link
30/06/2015, Make Reference, Gregster, Link
30/06/2015, Make Reference, Silent_Scone, Link
30/06/2015, Make Reference, MDPlatts, Link
30/06/2015, Make Reference, Firefox35, Link
30/06/2015, Make Reference, uksoldierboy, Link
29/06/2015, Make Reference, Sesta, Link
29/06/2015, Make Reference, TheSwede, Link
29/06/2015, Make Reference, whyscotty, Link
25/06/2015, Make Reference, Kaapstad, Link
25/06/2015, Make Reference, Boomstick777, Link
25/06/2015, Make Reference, machinebummer, Link
25/06/2015, Make Reference, AMDMatt, Link

To get on the Roll of Honour all you have to do is post a pic with your user name on it of your Fury X.



GoMgQTO.jpg



 
So in past couple of days was toying around with luxmark 3.1.
And since I had some time, and was brainfarting, I thought hey let's push one of the cards to the limit.
Final GPU clock(through CCC) 1197Mhz with obviously stock volts and +50% power limit (power limit +35% crashed the drivers during one of the runs). End results:couple of best results in luxmark leaderboards, and coming quite close to superclocked 980ti (ran in linux). Though it has been reported, that nvidia's new suggested compiler options and optimisations are causing some artifacting in real world rendering, but they pass the 3 scenes in benchmark, so have no problem with that.
I was experiencing quite a bit of throttling, I am suspecting VRM, since the GPU itself was under 60C all the time. I do remember someone theorize that VRM cooling might not be perfect (bad contact or something). I kinda agree with it, but future will tell how it is. Because clock scaling was not the best. Also, clocking fury x, now is a bit easier, I mean it clocks a bit higher. During 1st weeks of testing I could stably run only 1113Mhz. Now I see myself clocking GPU to 1129-30Mhz range. Not a lot, but still. Maybe it is colder weather, drivers, or something else.

But I guess TLDR, let's get back to usual 10 year old stand up comedy central ;)

For best results on the Fury X you need to keep the temps as low as possible as they are very sensitive to heat. Going from the stock cooler to a custom waterblock gave me an extra 20 to 30mhz (1140mhz to 1150mhz) on each card. My cards now run at 36c when they are flat out. Have you ever noticed how the non Fury X with an air cooler overclocks worse than the Fury X despite having less active silicon. I think it is all down to temps of the GPU core.
 
Hi guys

I promised i would update when i got my Fury X'es water cooled: http://imgur.com/a/u72ED.
As you can see i like actual loops in my water loop :)
The noise is now almost none exciting, the cards rarely go over 46 degrees and I’m just very happy.

Welcome and on TROH.:)

The Roll of Honour.


16/09/2015, Make Reference, Jonez Link
07/09/2015, Make Reference, Jonahun Link
24/08/2015, Make Reference, WeSbO Link
07/08/2015, Make Reference, Howling Link
05/08/2015, Make Reference, LoadsaMoney, Link
04/08/2015, Make Reference, Dicehunter, Link
30/07/2015, Make Reference, X3T, Link
29/07/2015, Make Reference, FredFlint, Link
24/07/2015, Make Reference, ALXAndy, Link
20/07/2015, Make Reference, Ash0787, Link
20/07/2015, Make Reference, phiiil, Link
05/07/2015, Make Reference, muziqaz, Link
30/06/2015, Make Reference, Gregster, Link
30/06/2015, Make Reference, Silent_Scone, Link
30/06/2015, Make Reference, MDPlatts, Link
30/06/2015, Make Reference, Firefox35, Link
30/06/2015, Make Reference, uksoldierboy, Link
29/06/2015, Make Reference, Sesta, Link
29/06/2015, Make Reference, TheSwede, Link
29/06/2015, Make Reference, whyscotty, Link
25/06/2015, Make Reference, Kaapstad, Link
25/06/2015, Make Reference, Boomstick777, Link
25/06/2015, Make Reference, machinebummer, Link
25/06/2015, Make Reference, AMDMatt, Link

To get on the Roll of Honour all you have to do is post a pic with your user name on it of your Fury X.



GoMgQTO.jpg



 
Why not? These results show us what we see in a lot of games.
With a second card you get a good boost, Adding a 3rd or 4th tends to be a waste of money. There are games that will use the extra grunt but they are few and far between.

Because both Matt and myself have done the same benchmarks they used and managed a great deal better.
 
This is meant to be about the scaling between 2, 3 and 4 cards.

As for there cpu it doesn't mention speed so presumably they are running it at stock speeds which seems a bit dumb considering it's an open bench and they're using an AIO cooler.

I have seen it happen way too much with tech sites where they bench 3 or 4 cards and don't use max settings or the CPU is way too slow or even at stock.

Even worse depending on which way the site leans they will blame the drivers and say either SLI or C/F does not scale as well as the other (cross out SLI or C/F here).

I think Tweaktown also said in the review that they will be also benching 4 TXs to compare. That should be good for a laugh as I have 4 FXs and 4 TXs along with a couple of 5960X based systems so I may post some of my own scores when they do the review.

The sort of games I play @4k I can get away with using a single card but when I use the extra cards they do scale and pull their weight. Averaging 170fps+ in BF4 maxed @2160p in a 60+ player game is possible, shame my monitor will only do 60htz.:D
 
I just registered to get on TROH, heres my picture:

show.php
[/URL][/IMG]

Welcome and on TROH.:)

The Roll of Honour.


21/09/2015, Make Reference, Boomzilla, Link
16/09/2015, Make Reference, Jonez, Link
07/09/2015, Make Reference, Jonahun, Link
24/08/2015, Make Reference, WeSbO, Link
07/08/2015, Make Reference, Howling, Link
05/08/2015, Make Reference, LoadsaMoney, Link
04/08/2015, Make Reference, Dicehunter, Link
30/07/2015, Make Reference, X3T, Link
29/07/2015, Make Reference, FredFlint, Link
24/07/2015, Make Reference, ALXAndy, Link
20/07/2015, Make Reference, Ash0787, Link
20/07/2015, Make Reference, phiiil, Link
05/07/2015, Make Reference, muziqaz, Link
30/06/2015, Make Reference, Gregster, Link
30/06/2015, Make Reference, Silent_Scone, Link
30/06/2015, Make Reference, MDPlatts, Link
30/06/2015, Make Reference, Firefox35, Link
30/06/2015, Make Reference, uksoldierboy Link
29/06/2015, Make Reference, Sesta, Link
29/06/2015, Make Reference, TheSwede, Link
29/06/2015, Make Reference, whyscotty, Link
25/06/2015, Make Reference, Kaapstad, Link
25/06/2015, Make Reference, Boomstick777, Link
25/06/2015, Make Reference, machinebummer, Link
25/06/2015, Make Reference, AMDMatt, Link

To get on the Roll of Honour all you have to do is post a pic with your user name on it of your Fury X.



GoMgQTO.jpg



 
Worst thing that could happen is AMD will allow AIB partners to use their own cooling solutions.

This could lead to lower prices and higher availability leading to higher sales of the Fury X.
 
Well someones bought a Sapphire, so they've made 1 sale today at least. :p

It was not me lol.

I already have 5 Fury Xs.

One of my cards failed so I bought a new one straight away and thought I could get a refund on the faulty one. Unfortunately when I went to RMA it I was told they would only replace it as I had had it longer than 1 month.:eek:
 
Thought I would add mine to the ever growing list, this is actually my 2nd Fury X, first one ordered on the 25th June and received early August was a screamer but due to work commitments (14+ hour days) I never got chance to return it for a replacement until this week.

Original card was an XFX, replacement is a Sapphire and so far its great, still a slight noise from the pump but its barely audible with the case panel on, unlike the previous which could be heard in all rooms of my flat.

XQPU5SH.jpg

Welcome and on TROH.:)

The Roll of Honour.


26/09/2015, Make Reference, MadMossy, Link
21/09/2015, Make Reference, Boomzilla, Link
16/09/2015, Make Reference, Jonez, Link
07/09/2015, Make Reference, Jonahun, Link
24/08/2015, Make Reference, WeSbO, Link
07/08/2015, Make Reference, Howling, Link
05/08/2015, Make Reference, LoadsaMoney, Link
04/08/2015, Make Reference, Dicehunter, Link
30/07/2015, Make Reference, X3T, Link
29/07/2015, Make Reference, FredFlint, Link
24/07/2015, Make Reference, ALXAndy, Link
20/07/2015, Make Reference, Ash0787, Link
20/07/2015, Make Reference, phiiil, Link
05/07/2015, Make Reference, muziqaz, Link
30/06/2015, Make Reference, Gregster, Link
30/06/2015, Make Reference, Silent_Scone, Link
30/06/2015, Make Reference, MDPlatts, Link
30/06/2015, Make Reference, Firefox35, Link
30/06/2015, Make Reference, uksoldierboy Link
29/06/2015, Make Reference, Sesta, Link
29/06/2015, Make Reference, TheSwede, Link
29/06/2015, Make Reference, whyscotty, Link
25/06/2015, Make Reference, Kaapstad, Link
25/06/2015, Make Reference, Boomstick777, Link
25/06/2015, Make Reference, machinebummer, Link
25/06/2015, Make Reference, AMDMatt, Link

To get on the Roll of Honour all you have to do is post a pic with your user name on it of your Fury X.



GoMgQTO.jpg



 
Back
Top Bottom