Thermalright now at OcUK
- Thread starter Ace Modder
- Start date
Soldato
I think the price on TY-140 fan is excellent considering that noctua nh-d14 fan prices are above £13.
Can some one please compare TY-140 vs Akasa Viper and TY-140 vs NF-P14
. I would love to see the results
Can some one please compare TY-140 vs Akasa Viper and TY-140 vs NF-P14
. I would love to see the resultsWill do when the TY-140 arrives.
The NF-P14 is quite loud untill you turn it down, the TY-140 is supposed to be a lot quieter so I'm very much looking forward to comparing them.
spent ages trying to find a silver arrow in stock then orderd the d14, ah well
I was almost the same wanted to try but ended up with the noctua but am really happy anyway as its just as good or better than most of these.
Soldato
Those fans are meant to be awesome, but as with the noctuas - why the gay colours? lol what's wrong with black? lol
If the IFX-14 does come back (at the same price it used to be), I'll be a happy bunny! Was just about to buy one of those when they disappeared from the stocklist lol
If the IFX-14 does come back (at the same price it used to be), I'll be a happy bunny! Was just about to buy one of those when they disappeared from the stocklist lol
Soldato
I would be interested to know how good the TY-14 actually are. Although my Fractals are near silent, I wouldnt mind a slightly better case airflow.
Soldato
Any chance of Thermalright IFX-14 coming back or is ocuk done with it? I know it is 3-4 years old heatsink and the ancestor of silver arrow and cogage arrow but gives excellent performance on par with silver arrow or even better especially when attached to akasa viper fans
Edit: I bought it from ocuk back in november for my Q6600 for £29.99 and it has been excellent performer over my previous thermaltake big typhoon and has a bad ass looking design.
Any further news on Thermalright IFX-14?
Associate
just installed the thermalright shaman
heres a few pics of the card and how it fits
few words after pics
1.very easy to install
2.cools very well
3.slient operation
i have left the back plate on the card as i didnt want my card bending under the weight of the cooler, excuse the motherboard stand offs, my friend brought the wrong size round so a trip to the shop tomorrow to get some proper nuts! lol.
i used the x clamp that came with the cooler and the rubber mounts sit below the x clamp on the board itself.
then the x clamp over the top off the back plate, very secure!
ok temps wise iam getting 26-28 idle and a furmark run the highest it got was 54, this was with the fan set at 50% in bios but showing 43% in hw monitor.
so very please with the results as the stock cooler reach 82 in furmark and no more hover sound coming from the case
heres a few pics of the card and how it fits
few words after pics
1.very easy to install
2.cools very well
3.slient operation
i have left the back plate on the card as i didnt want my card bending under the weight of the cooler, excuse the motherboard stand offs, my friend brought the wrong size round so a trip to the shop tomorrow to get some proper nuts! lol.
i used the x clamp that came with the cooler and the rubber mounts sit below the x clamp on the board itself.
then the x clamp over the top off the back plate, very secure!
ok temps wise iam getting 26-28 idle and a furmark run the highest it got was 54, this was with the fan set at 50% in bios but showing 43% in hw monitor.
so very please with the results as the stock cooler reach 82 in furmark and no more hover sound coming from the case
Associate
Hey,
Good job expanding your range but as this guy said, too expensive compared to others. A few pence or a pound fair enough, but £10+ is a lot of money.
Associate
i am just running the unlocked shader bios.
Associate
The Shaman is supposed to be compatible with th 6950/70, but its not listed as such.
Skid, did it come with VRM cooling or is that your own?
Skid, did it come with VRM cooling or is that your own?
Associate
it came with the vrm cooling, it also fits and cools the 6970 very well