• Notice regarding image hosts and attachments. See here.

Well I fell down the custom keyboard world.

I’m explicitly avoiding TMR from now on because of how they interfere with my joysticks and stuff (HID issues because in gets picked up as a controller).

I’ve been swapping about a lot and about to try a Chillkey ND104, decided this route more sensible than the other cost wise.

I was going to get those Nuphy Panda switches and put it in but for some reason they never got shipped and I got a refund. Which is when I put it in TMR and thinking what to do next. I could get some Nuphy Lemon Yellow but they seem to be out of stock, or if I go linear I thought the Keygeek Y2 sounded nice on videos. But then I remember I have Oil Kings at home unused.....they cost me quite a bit so it's probably worth a shot.
 
I was going to get those Nuphy Panda switches and put it in but for some reason they never got shipped and I got a refund. Which is when I put it in TMR and thinking what to do next. I could get some Nuphy Lemon Yellow but they seem to be out of stock, or if I go linear I thought the Keygeek Y2 sounded nice on videos. But then I remember I have Oil Kings at home unused.....they cost me quite a bit so it's probably worth a shot.

There’s a million switches and all I can go by is videos and opinions. I love how the Yunzi B98 pro sounds with the candy linear, so will probably get some of those and hope it’s close enough. Then again, barebones vs prebuilt isn’t much difference with the chill, so probs get pre done and see how I find the silent switches.

Just got to decide if I get an ansi one and order the iso board from china. Or just stick with ANSI for easier keycap choice.
Think only gunmetal comes as iso standard, I was going to go for white.
 
Last edited:
There’s a million switches and all I can go by is videos and opinions. I love how the Yunzi B98 pro sounds with the candy linear, so will probably get some of those and hope it’s close enough. Then again, barebones vs prebuilt isn’t much difference with the chill, so probs get pre done and see how I find the silent switches.

Just got to decide if I get an ansi one and order the iso board from china. Or just stick with ANSI for easier keycap choice.
Think only gunmetal comes as iso standard, I was going to go for white.

There are a million switches which is why I feel like I should play it safe by getting the Lemon Yellow, the problem is they are hard to get now. Or I could use the Linear that I have which are meant to be for my QK Alice. I do feel like I want to go tactile though, it's just more satisfying to type on.
 
TMR mode fixes the double or even triple keystrokes completely. I am going to save some money and stick with the switches for now as I do like how it sound, it is very pebble-ly.
 
Not sure I can get used to ANSI, keep hitting # instead of enter. Shame as this b98 pro sounds majestic.
I'd genuinely say to stick with it, the benefits of ANSI are worth a week or two of annoyance reworking muscle memory. More compatibility with keycaps, easier to find fully assembled keyboards and the price if ANSI usually is cheaper too.
 
I'd genuinely say to stick with it, the benefits of ANSI are worth a week or two of annoyance reworking muscle memory. More compatibility with keycaps, easier to find fully assembled keyboards and the price if ANSI usually is cheaper too.

I keep typing like this#

I can’t believe how good it sounds, very reasonable too, it was like £70 and very hefty, wireless 2.4 windows/Mac and VIA compatible. Cat knob/dial optional.

I will stick it out for now. Worst case I just use it for gaming. I think I’ll get their numpad too when it’s on offer. Thought about an ND104 and change it to the switches used in this keyboard but doubt it would sound the same.

After striking gold on my mouse I do realise that a lot of the time, paying extra is rarely giving you anything extra, especially with peripherals.
 
Last edited:
I can do both ANSI and ISO, I am typing on ISO now. You just end up in a neutral spot where your finger wioll hit either Enter keys.

I want to say left Shift is harder to hit though as it is much smaller so I just use Right Shift more.
 
It's only been a day or so but already I'm not making anywhere near as many mistakes with the enter key, there's a slight pause as I go to press it but better than hitting the wrong one all the time. I don't touch type so that probably hinders me too, I do my own thing.
 
Somewhat keyboard related... Picked up one of the soft silicone cables from Ordinary Labs last week (https://ordinarylabs.com/products/ordinary-labs-usb-c-cable).

It has a really nice finish to it, much more soft touch than a 'sticky' silicone - and relatively well priced compared to a few other places offering a similar cable. I think one of the main reasons I like it is because it matches the Artisan Soft in orange really nicely...
 

Attachments

  • IMG_0295.webp
    IMG_0295.webp
    145.2 KB · Views: 22
Anyone on here got the Wooting with the split spacebar? I'm in the market for a new keyboard and I'm torn between the new Logitech Pro X2 Rapid or the Wooting 80HE+. I'm leaning more on the Wooting purely on the split spacebar as I could potentially see that as a benefit, but I'd just like to check it's not just a gimmick.
 
Anyone on here got the Wooting with the split spacebar? I'm in the market for a new keyboard and I'm torn between the new Logitech Pro X2 Rapid or the Wooting 80HE+. I'm leaning more on the Wooting purely on the split spacebar as I could potentially see that as a benefit, but I'd just like to check it's not just a gimmick.
Yup, I've got the 60HE v2 with the split space bar. I swap between this and my Neo75 depending on if I'm working or gaming. I probably could manage with just a single keyboard and use either but I quite like swapping between.

I like the split space a lot, not necessarily because I bind different things to each split - but because the middle button between them becomes super useful. In the 'typing' profile it's my Fn layer 1 button - and then in gaming I bind it as 'walk' in some games or crouch in others. Makes it super handy having it right by my thumb!

I'd probably have been fine without the split space version but it's a nice different style to use and it does have it's uses.
 

Attachments

  • IMG_0062.webp
    IMG_0062.webp
    217.4 KB · Views: 25
Yup, I've got the 60HE v2 with the split space bar. I swap between this and my Neo75 depending on if I'm working or gaming. I probably could manage with just a single keyboard and use either but I quite like swapping between.

I like the split space a lot, not necessarily because I bind different things to each split - but because the middle button between them becomes super useful. In the 'typing' profile it's my Fn layer 1 button - and then in gaming I bind it as 'walk' in some games or crouch in others. Makes it super handy having it right by my thumb!

I'd probably have been fine without the split space version but it's a nice different style to use and it does have it's uses.
That does look tidy, I've seen that people have mapped that split button as space bar for anything outside of gaming so as it doesn't impact their typing.
 
Tried ordering a GMMK 3 with HE switches for £19.99 the other day, thought I placed the order, but the next day I had no emails etc so it must have timed out.

Then tried ordering it yesterday at £23.99 and when I tried placing the order it was out of stock :cry: Lesson learnt, if you see a bargain, buy it straight away!

What are peoples thoughts on HE switches? Would be for CS2.
 
Tried ordering a GMMK 3 with HE switches for £19.99 the other day, thought I placed the order, but the next day I had no emails etc so it must have timed out.

Then tried ordering it yesterday at £23.99 and when I tried placing the order it was out of stock :cry: Lesson learnt, if you see a bargain, buy it straight away!

What are peoples thoughts on HE switches? Would be for CS2.
Magnetic switches really depend on a decent software to control them, I have them on the Lofree Hyzen and really rate them - no longer play CS though
 
Tried ordering a GMMK 3 with HE switches for £19.99 the other day, thought I placed the order, but the next day I had no emails etc so it must have timed out.

Then tried ordering it yesterday at £23.99 and when I tried placing the order it was out of stock :cry: Lesson learnt, if you see a bargain, buy it straight away!

What are peoples thoughts on HE switches? Would be for CS2.
Not related to your question, but I saw they were going cheap the other day and then forgot about it... the fact they were doing the non-HE barebones for cheaper than a Logitech K120 is crazy! (and if the full price is accurate, £25 for that is amazing!)

But thanks for the reminder.... Been looking for an opaque UK-ISO cap set for a while!
My basket at OcUK:
Total: GBP26.87 (includes delivery: GBP0.00)​

2 sets of caps and 3 full sets of switches for the price of a bottle of rum :D gives me something to play about with!

40/45/55g switch variants and will probably mix and match the caps as I quite like a contrast look... I like my current set on my main board, but sometimes struggle to see the legends at night. There's also my work KB (Qpad MK85) and a cheapo wireless 65 I got on Amazon a while back... it sounds pretty good but the generic reds are pretty rubbish.
I also have an Asus Cerberus that I stopped using because it multi registered on several keys, not sure if it was the switches or if it needed a longer debounce in the firmware...It's not hot-swap but for £5, tempted to solder it :D
 
Last edited:
My new desk is black/stealthy so now I need to change my peripherals.

I will get black version of my current mouse as I think it’s unbeatable for the price. Keyboard is another matter.

Just realised that library photo is mental, who has speakers placed like that.
IMG_6163.webp


Gun metal or black would suit I think. Though I wouldn’t have the silver keys on the black one.


IMG_6164.webp

IMG_6165.webp
 
Last edited:
Yeah grey for me also.

I've put the 40g Fox switches on my cheapo keyboard (Newmen GM610) and it feels and sounds pretty good, I think I could get used to the ANSI layout, but am still struggling a bit with all the keybinds for the 65 (think it's actually a 61).
I've also had to stay with the stock caps (did briefly try the polys, and they looked nice) as it has so many Fn second layer controls that I'd never be able to remember them all, might have to pick up another 75 or TKL at some point (ideally a 100 or close, but obviously less good options at that size)
 
Back
Top Bottom