XSPC H2 TITAN TRI-SLI GOODNESS

Been running for a few days now and everything seems fine and dandy :)

Both D5 pumps set to 2 and fans ramp up to 1400 approx under load (very quiet) :D

Room temp of 22 deg

CPU Idle - 26 deg
Load - 75 deg Prime95 (4.8Ghz/1.42v) 75 deg is the hottest core the rest are mid-high 60's

GPU's Idle 27-25-25
Gaming stock 42-40-41
Max stable OC 51-49-48
Above temps are playing Crysis 3 as for me it generates the most heat

When I ran my cards on air temps would reach high 80's to mid 90's, so very happy with the results

The other benefits I've seen in WC my Gpu's is a gain of 39mhz on my worse card, but more importantly no downclocking :)
 
Sorry mate, forgot to say this

When you start to fit them, one at a time and don't fit the thumb screws till all the cards are fitted.

Fit the flow bridge to the card b4 fitting in the case, have a look at my thread

as pictures are better than words.

Does the top of your case come off easy, if so remove it so its easier to

to fit the screws of the flow bridges this way.

When you fitting your blocks?

I've trusted my mobile number if you need any help
 
goochinbuda said:
Fantastic build mate, very similar to my own.

Any concerns over the weight of those GPU cards stressing the PCI slots?? Mine are anchored well at the IO plate but they are sagging just a little towards the end of the PCI slot.

Any issues using the 320.xx drivers on your Titans? I have to use the 314.xx versions to avoid game freezes and my PC rebooting itself.
Click to expand...

Thank you :)

No sagging on my cards that I can see.

Driver wise 314.22 + 326.29 these are the best so far :)

Tried the 320.xx drivers but removed when ppl started reporting issues as a precaution
 
acme15 said:
Looks much better in that Phanteks case! :D

I was going to post saying it looks beautiful but its a shame about the unrefined exterior styling, and then BAM. :p

Lovely build mate :)
Click to expand...

Thanks

Pgreenwo said:
stellar job mate. Really tasteful. I have the Enthoo on order for a new machine. Looks like a great case. Enjoy it!
Click to expand...

Cheers

Looking forward to seeing what you do with yours
 
MjFrosty said:
Loving the use of qdc by the way. I'm putting two on the gpu bridge, two on the cpu and one as a drainline. I actually bought a female one by accident initially but they're awesome :)
Click to expand...


They are a godsend, just bleeding the system after fitting the pumps.

QDC's on the res, makes life so much easier.

Without them would have took ages :)
 
You must log in or register to reply here.
Back
Top Bottom