Associate
- Joined
- 3 Mar 2009
- Posts
- 574
Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.
man that build looks sweet Spock.
Mine is still not letting me adjust mine even with those 2 options ticked, have restarted AB too.
Hello mate! Fellow Inno3D ultra owner here Love this card, but no rattle to speak of. How is this manifesting itself exactly if you haven't tried it yet?
I've been using it since Thursday just no forum access till tonight. Was fine till the early hours was boosting the fans a bit and its started to rattle. I'm going to take it back out me rig and hope something is loose. I was running on max fans for about 15mins when it started. I love the card also so would rather not send it back
Also from ocn.
"It is the way to set your max stable oc to the last clock of the boost table, and then setting all values in the voltage table that are LARGER than your max allotted (or available) voltage to your max allotted (or available) voltage. In other words: You would then adjust the voltage table because if you do NOT, the entire voltage table is not being used. Here just an example: Some cards are voltage limited and can only supply a max of 1.212V (which is plenty, by the way). HOWEVER, example, say, in your voltage table, CLK73 has 1275.0V -1281.3V. It would never jump to this entry since this voltage is already far out of range of your available voltage! By adjusting those values which are HIGHER than your max voltage you make it so that your entire voltage table is actually available."
This also cinfirms my thoughts that the card could never boost to 74.
Are you using ref card varkanoid or amp? I suspect ref as amp bios should bevidentical to mine which would suggest amp is more limited than ref for some reason.
Look at you voltage minimum for entry 74 on your bios. I suspect it is below or at 1250mv mine is at 1281mv which is a voltage i cant provide to the card without a bios edit. I suspect they closed off those entries for a reason but why.....
Think it's not my week bought a XB280HK 4k2k at the same time and that's faulty. Turns on with nice red lines all over it.
You've not really been keeping up with the Acer threads in the monitor section have you ?
Make sure you return it under the 14 day rule and get a refund not RMA for replace/repair!
Question for Spok or any other MSI non ref owners - bit of an odd one, but how easy do you think it would be to hide/paint the red parts of the cooler? I like MSI cards but being a bit picky as I would prefer a gold/yellow and black design to go with the rest of my case.
Finally got mine in, had it since 16/06/2015 but been too busy with work until this weekend.