Associate
getting the g5 soon.will have asrock next week
**The ASrock 939dual-SATA2 (ULi M1695) thread**
- Thread starter wunkley
- Start date
Associate
couldnt wait for ovck to get them in
Just picked one up meself just to test how it performs against the Nforce chipset.
Looking to see how well the Sata II controller works aswell as X64 Compatability as the board comes with X64 drivers.
Running 2 gigs corsair currently at 1T 2.3.3.8 so hopefully if i can get them timings on the Uli
Will be using an ati X850PE PCie / FX55
probrably set it up later today or tomorrow so i will put a few benchmark tests in the thread later on.
Looking to see how well the Sata II controller works aswell as X64 Compatability as the board comes with X64 drivers.
Running 2 gigs corsair currently at 1T 2.3.3.8 so hopefully if i can get them timings on the Uli
Will be using an ati X850PE PCie / FX55
probrably set it up later today or tomorrow so i will put a few benchmark tests in the thread later on.
Associate
I've given Windows Pro x64 a go and haven't had any problems to far. I'm using the windows x64 trial from the microsoft site. Installed the Far Cry x64 patch, ran the Regulator timedemo and got an average of 47fps with spec in sig @ 1284x1024. Haven't had to install any of the drivers from the cd yet as i don't currently use the onboard sound, LAN or SATA(2) controller.
TIP: If your looking for drivers for certain hardware/software, search in google
'windows x64' followed by what you are looking for. eg. 'windows x64 creative driver'. You can usually find what your looking for in the first few results.
TIP: If your looking for drivers for certain hardware/software, search in google
'windows x64' followed by what you are looking for. eg. 'windows x64 creative driver'. You can usually find what your looking for in the first few results.
Associate
lets us know how you get onCoolasmoo said:
Just a quick update as i havent finished yet
Initial thoughts,
XP64 installed without a problem on the JM whatsemathing sata 2 controller And its impressive to say the least.
nforce4
Jmicron
Updated bios to latest official
Running the corsair at 2.3.3.6 1T (2 gigs)
All drivers loaded up and everything is fine so far
Will test out gaming (BF2) later
Initial thoughts,
XP64 installed without a problem on the JM whatsemathing sata 2 controller And its impressive to say the least.
nforce4
Jmicron
Updated bios to latest official
Running the corsair at 2.3.3.6 1T
(2 gigs)All drivers loaded up and everything is fine so far
Will test out gaming (BF2) later
Associate
what the lasest bios]1.20] and is the more fetures in it
Associate
The P1.20 Bios opens up the overclock options and is available here. There are no overcolcking options in the P1.10 bios that's shipped with the board. You'll need to make a MS-DOS bootable floppy disk (or CD). Here is the process in more detail. There are a few other minor fixes and improvements for stablilty.
.
Coolasmoo, looks like your getting some good results from the SATA2 controller, good news for when i upgrade
.
There's another beta bios in testing at OCworkbench that's so far allowed up to 300MHz fsb, but i'm not prepared to be the guinea pig just yetASRock release notes said:
.Coolasmoo, looks like your getting some good results from the SATA2 controller, good news for when i upgrade
.
Last edited:
Associate
cheers penqellyd
pengellyd said:Coolasmoo, looks like your getting some good results from the SATA2 controller, good news for when i upgrade
Yep, looks like im gonna hold onto this board for a while,
Bf2 runs fine
Memtest the memory with no errors for an hour
Seems to be no problems that i can see so far running XP64
Also silent passive Northbridge is an added bonus (although i had this with the an8ultra
)All this for under 50 quid
Last edited:
Associate
- Joined
- 8 Sep 2005
- Posts
- 508
hi im planing on geting one of these, does this have standed ide connectors on it aswell as the other stuff
Associate
CHHERS FOR INFOCoolasmoo said:Yep, looks like im gonna hold onto this board for a while,
Bf2 runs fine
Memtest the memory with no errors for an hour
Seems to be no problems that i can see so far running XP64
Also silent passive Northbridge is an added bonus (although i had this with the an8ultra
All this for under 50 quid
Associate
Yes, it does. It has 2 x IDE connectors, 1 x floppy connector (below the bottom PCI slot), 2 x SATA connectors and 1 x SATA2 connector.smithy1983 said:
Larger picture of the board layout
Hmmm,
Odly enough i have found the 1T bug that some of you guys have found.
Not games or benchmark but browsing web and clicking certain flash links.
Just incase its X64 related im dropping back to xp32 to see if its anything else.
Shame really because its a cracking board and i really would like to keep this.
1T / 2T
Write : 2301 / 1674
Read : 5956 / 5577
Latency : 51.5 / 58.4
edit/
its the same in 32bit unfortunately.
If any of you want to do a quick test for me:
go to this link
http://www.atari.com/fahrenheit/
Click ENGLISH an choose language and see if it blue screens.
im using Cat 5,8 drivers if it makes a difference
Ta
Odly enough i have found the 1T bug that some of you guys have found.
Not games or benchmark but browsing web and clicking certain flash links.
Just incase its X64 related im dropping back to xp32 to see if its anything else.
Shame really because its a cracking board and i really would like to keep this.
1T / 2T
Write : 2301 / 1674
Read : 5956 / 5577
Latency : 51.5 / 58.4
edit/
its the same in 32bit unfortunately.
If any of you want to do a quick test for me:
go to this link
http://www.atari.com/fahrenheit/
Click ENGLISH an choose language and see if it blue screens.
im using Cat 5,8 drivers if it makes a difference
Ta
Last edited:
Associate
Coolasmoo said:
whats the 1t bug,how does affect
Associate
would 2 gigs of munskin pc3500 black work ok with this mobo
have 4 x 512 modules of the ram
have 4 x 512 modules of the ram