Soldato
Download. <CLICKY>
Enables Phenom II support on the Abit AX78 AM2 board.
Its an Abit Beta so use at your own risk - Myself or OcUK accept no responsibility for mishaps during the flashing process.
It MUST be ran from a floppy, NOT Abit 'Auto Update' tools or Windows based utilities.
release notes: updated Microcode to support Phenom II cpu's (Beta)
Advice and instructions on how to flash your bios, (Please do not use the Abit FlashMenu application, allways flash from floppy or USB flash drive)
here is the bios flash guide put together by the guys on the Raptor Pit forum and ex abit forum, (Hope its ok to use this link guys)
Flashing Guide.<CLICKY>
once you have flashed the bios, please clear cmos, and then boot computer and enter bios, at this point please LOAD OPTIMIZED DEFAULTS and reboot, into bios again, where you can set mem voltages and whatever else you want to set.
AX78 bios file 14 (beta) and awdflash.exe: AX78 bios file v14 (beta)<CLICKY>
Just to re-iterate, Myself or OcUK can accept no responsibility for any mishaps during the flashing process.
Hope This Helps.
Enables Phenom II support on the Abit AX78 AM2 board.
Its an Abit Beta so use at your own risk - Myself or OcUK accept no responsibility for mishaps during the flashing process.
It MUST be ran from a floppy, NOT Abit 'Auto Update' tools or Windows based utilities.
release notes: updated Microcode to support Phenom II cpu's (Beta)
Advice and instructions on how to flash your bios, (Please do not use the Abit FlashMenu application, allways flash from floppy or USB flash drive)
here is the bios flash guide put together by the guys on the Raptor Pit forum and ex abit forum, (Hope its ok to use this link guys)
Flashing Guide.<CLICKY>
once you have flashed the bios, please clear cmos, and then boot computer and enter bios, at this point please LOAD OPTIMIZED DEFAULTS and reboot, into bios again, where you can set mem voltages and whatever else you want to set.
AX78 bios file 14 (beta) and awdflash.exe: AX78 bios file v14 (beta)<CLICKY>
Just to re-iterate, Myself or OcUK can accept no responsibility for any mishaps during the flashing process.
Hope This Helps.