Corsair SP120 & AF120 owners!

Terrier_Jimlad · 2 Jul 2013 at 22:10

Received my two SP120 and three AF120 however the 4 screws provided with each fan, dont seem to actually screw in to any of the holes. They get about 1/4 to 1/2 in then jam up pretty solid. I managed to get maybe 3 at tops in to the holes on various fans.

It's not a major issue as two of them went on the h100i, and two of the af120s i mounted with the screws from the stock fans on the 350D, but i'm just wondering did anyone else come across this too?

And no, i'm not a weaklin and not screwing hard enough

Resident · 2 Jul 2013 at 22:54

Mine fitted ok, all 6 of them (2 SP, 4 AF). One of the AFs was a bit stiff but my power-screwdriver took care of that.

cypto · 3 Jul 2013 at 00:28

Screws you need are in the box that comes with the 350D (in the drive cage). Long screws with a small thread on the end.

Long screws that comes with the 350D for the front 140's

Screws that come with the H100 or your Rad to mount the radiator and fans.

Doomedspeed · 3 Jul 2013 at 09:02

cypto said:
Screws you need are in the box that comes with the 350D (in the drive cage). Long screws with a small thread on the end.

Long screws that comes with the 350D for the front 140's

Screws that come with the H100 or your Rad to mount the radiator and fans.

Good advice..

THe h100 will use different screws.

The Screws with the fans will be to secure to the case, such as a rear fan.