Corsair Graphite 600TM Midi Tower Mesh Windowed Case - Black (CC600TM) @ £79.99 inc VAT
Building a Great-Looking, High Performance System Has Never Been Easier
The Graphite Series 600T makes it easy to build a world-class gaming system. With excellent cooling from the dual 200mm fans, eight PCI-E expansion slots to accommodate multiple graphics cards, and plenty of room for large, power-hungry components, the Graphite Series 600T can handle just about anything you can throw at it.
Mid-Tower Size, Full-Tower Features
The Graphite Series 600T is a mid-tower in height, but inside it’s positively cavernous. Easily accommodate even the longest graphics cards in the industry due to the reconfigurable hard drive bays. The increased space behind the motherboard tray allows clean, uncluttered cable routing. Up to six hard drive caddies, each of which can accommodate SSDs and standard mechanical disks, sit below the four 5.25" tool-free optical drive bays.
If that weren’t enough, you can remove the top panel 200mm fan and install a 240mm radiator and dual 120mm fans for a quick watercooling upgrade.
Features for System Builders
Corsair innovated cable routing with the Obsidian Series™ cases, and the Graphite Series features the same ingenious design. Pre-cut holes in the motherboard tray with rubber grommets and plenty of room behind the motherboard to route cables for a clean, uncluttered interior. The optical drive bays are tool-free, the side panels easily detach with the built-in latch mechanisms, and the integrated fan controller allows you to choose between quiet operation or maximum cooling performance.
Specifications
- Warranty: Two years
- Model: CC600TM
- Weight: 13KG
- Colour: Black
- Case Form Factor: Mid-Tower
- Dimensions: 592mm x 265mm x 507mm
- Case Motherboard Support: Mini-ITX, MicroATX, ATX, E-ATX
- Maximum GPU Length: 360mm
- Maximum CPU Cooler Height: 170mm
- Maximum PSU Length: 200mm
- Case Expansion Slots: 8
- Case Drive Bays: (x4) 5.25in, (x6) Combo 3.5in/2.5in
- Case Material: Steel
- Case Power Supply: ATX (not included)
- External Connections: (x4) USB 2.0, (x1) USB 3.0, (x1) Fan Controller, (x1) Headphone Port, (x1), Microphone Port
- Fan Mount Locations: Front: (x1) 200mm, Top: (x1) 200mm or (x2) 120mm, Rear: (x1) 120mm
- Fans Included: Front: (x1) 200mm: Top: (x1) 200mm, Rear: (x1) 120mm
- Radiator Mount Locations: Top: 240mm
- Compatible Corsair Liquid Coolers: H55, H60, H75, H80i, H100i
Only £79.99 inc VAT.
ORDER NOW
______
Parvum Systems Veer 1.0 ITX Case - Blacked Out @ £99.00 inc VAT
The Veer from Parvum Systems combines the stylish inverted ITX motherboard layout of their innovative X1.0 chassis design but with room to accomodate high performance watercooling solutions with ease!
Parvum have redefined small form factor builds in the past two years by evolving and being open to new ideas and designs.
The ever popular S2.0 has developed over time from customer feedback and input. Over the past two years, every modding forum on the planet has gone crazy for these small acrylic boxes and for good reason.
The latest product to come out of the Parvum think tank is the Veer1.0. This ITX chasis has been specifically designed for the water cooling enthusiast; perfect for the user that wants a small rig with more than enough cooling power to keep even the most demanding hardware at bay. The guys at Parvum build cases how a hardware enthusiast would build a case, smart decisions are made and implemented rather than cutting corners to save costs and designs are improved and refined to offer every customer the best product on the market with a unique and personal touch. Each Parvum case is manufactured in the United Kingdom and are built in small batches to ensure exclusivity.
As usual the Veer1.0 is crafted out of Parvum Systems now signature 5mm high quality acrylic; each case is individually cut using precise machining equipment. Each Veer1.0 is shipped flat packed.
USB3.0 headers on the front of the case compliment any modern motherboard and add to the carefully designed user experience. This discreet set of ports offer increased functionality without compromising the look of the case.
Due to Parvum constantly upgrading and updating their designs, some small aesthetic changes may occur.
Improvements in materials for case windows using scratch resistant acrylic means that your Parvum stays looking fresh whilst keeping a glass like clarity.
Most importantly, Parvum Systems takes great pride in the sourcing of their raw materials choosing a high quality, European sourced recycled acrylic. This ensures minimal waste in the production process as well as being kinder to the environment.
Specifications:
- Materials: Acrylic
- Dimensions (WxHxD): 267 x 295 x 357mm
- Maximum CPU Cooler Height: 160mm
- Motherboard Sizes: ITX
- 2.5" Drive Bays: 2
- Cooling Front: 1 x 120mm
- Cooling Rear: 1 x 80mm
- Cooling Top: 2 x 120mm
- PCI Slots: x 2
- Supports Full size power supply
- Max GPU Length: 335mm
- Max Fan/Radiator space in front of case: 100mm
- Max Fan/Radiator space in top of case: 65mm with water cooled GPU, 25mm with stock/air cooled GPU
Each case includes:
- 1x Parvum Systems F1.0 Performance Pressure Optimised Fan worth £11.99
- All required screws
Only £99.00 inc VAT.
ORDER NOW
Building a Great-Looking, High Performance System Has Never Been Easier
The Graphite Series 600T makes it easy to build a world-class gaming system. With excellent cooling from the dual 200mm fans, eight PCI-E expansion slots to accommodate multiple graphics cards, and plenty of room for large, power-hungry components, the Graphite Series 600T can handle just about anything you can throw at it.
Mid-Tower Size, Full-Tower Features
The Graphite Series 600T is a mid-tower in height, but inside it’s positively cavernous. Easily accommodate even the longest graphics cards in the industry due to the reconfigurable hard drive bays. The increased space behind the motherboard tray allows clean, uncluttered cable routing. Up to six hard drive caddies, each of which can accommodate SSDs and standard mechanical disks, sit below the four 5.25" tool-free optical drive bays.
If that weren’t enough, you can remove the top panel 200mm fan and install a 240mm radiator and dual 120mm fans for a quick watercooling upgrade.
Features for System Builders
Corsair innovated cable routing with the Obsidian Series™ cases, and the Graphite Series features the same ingenious design. Pre-cut holes in the motherboard tray with rubber grommets and plenty of room behind the motherboard to route cables for a clean, uncluttered interior. The optical drive bays are tool-free, the side panels easily detach with the built-in latch mechanisms, and the integrated fan controller allows you to choose between quiet operation or maximum cooling performance.
Specifications
- Warranty: Two years
- Model: CC600TM
- Weight: 13KG
- Colour: Black
- Case Form Factor: Mid-Tower
- Dimensions: 592mm x 265mm x 507mm
- Case Motherboard Support: Mini-ITX, MicroATX, ATX, E-ATX
- Maximum GPU Length: 360mm
- Maximum CPU Cooler Height: 170mm
- Maximum PSU Length: 200mm
- Case Expansion Slots: 8
- Case Drive Bays: (x4) 5.25in, (x6) Combo 3.5in/2.5in
- Case Material: Steel
- Case Power Supply: ATX (not included)
- External Connections: (x4) USB 2.0, (x1) USB 3.0, (x1) Fan Controller, (x1) Headphone Port, (x1), Microphone Port
- Fan Mount Locations: Front: (x1) 200mm, Top: (x1) 200mm or (x2) 120mm, Rear: (x1) 120mm
- Fans Included: Front: (x1) 200mm: Top: (x1) 200mm, Rear: (x1) 120mm
- Radiator Mount Locations: Top: 240mm
- Compatible Corsair Liquid Coolers: H55, H60, H75, H80i, H100i
Only £79.99 inc VAT.
ORDER NOW
______
Parvum Systems Veer 1.0 ITX Case - Blacked Out @ £99.00 inc VAT
The Veer from Parvum Systems combines the stylish inverted ITX motherboard layout of their innovative X1.0 chassis design but with room to accomodate high performance watercooling solutions with ease!
Parvum have redefined small form factor builds in the past two years by evolving and being open to new ideas and designs.
The ever popular S2.0 has developed over time from customer feedback and input. Over the past two years, every modding forum on the planet has gone crazy for these small acrylic boxes and for good reason.
The latest product to come out of the Parvum think tank is the Veer1.0. This ITX chasis has been specifically designed for the water cooling enthusiast; perfect for the user that wants a small rig with more than enough cooling power to keep even the most demanding hardware at bay. The guys at Parvum build cases how a hardware enthusiast would build a case, smart decisions are made and implemented rather than cutting corners to save costs and designs are improved and refined to offer every customer the best product on the market with a unique and personal touch. Each Parvum case is manufactured in the United Kingdom and are built in small batches to ensure exclusivity.
As usual the Veer1.0 is crafted out of Parvum Systems now signature 5mm high quality acrylic; each case is individually cut using precise machining equipment. Each Veer1.0 is shipped flat packed.
USB3.0 headers on the front of the case compliment any modern motherboard and add to the carefully designed user experience. This discreet set of ports offer increased functionality without compromising the look of the case.
Due to Parvum constantly upgrading and updating their designs, some small aesthetic changes may occur.
Improvements in materials for case windows using scratch resistant acrylic means that your Parvum stays looking fresh whilst keeping a glass like clarity.
Most importantly, Parvum Systems takes great pride in the sourcing of their raw materials choosing a high quality, European sourced recycled acrylic. This ensures minimal waste in the production process as well as being kinder to the environment.
Specifications:
- Materials: Acrylic
- Dimensions (WxHxD): 267 x 295 x 357mm
- Maximum CPU Cooler Height: 160mm
- Motherboard Sizes: ITX
- 2.5" Drive Bays: 2
- Cooling Front: 1 x 120mm
- Cooling Rear: 1 x 80mm
- Cooling Top: 2 x 120mm
- PCI Slots: x 2
- Supports Full size power supply
- Max GPU Length: 335mm
- Max Fan/Radiator space in front of case: 100mm
- Max Fan/Radiator space in top of case: 65mm with water cooled GPU, 25mm with stock/air cooled GPU
Each case includes:
- 1x Parvum Systems F1.0 Performance Pressure Optimised Fan worth £11.99
- All required screws
Only £99.00 inc VAT.
ORDER NOW