Hi All
I have purchased and fitted 16gb DDR3 2133mhz RAM, however speccy and my bios show that it is running at 1333mhz
XMP is already enabled and set to profile1 (the only other option)
I followed advice online and left the other options to auto
Updated BIOS and my motherboard (GA-Z68X-UD3P-B3) says it supports the following...
4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory
Support for DDR3 2133/1866/1600/1333/1066 MHz memory modules
No matter what I do I cant get it to run above that, I tried manually setting it to 21.33 but sometimes when I have XMP enabled or try doing that I get an error saying the system has experienced issues due to overclocking or change in voltages, if I press any key it boots normally but runs at 1333mhz
Any ideas?
I have purchased and fitted 16gb DDR3 2133mhz RAM, however speccy and my bios show that it is running at 1333mhz
XMP is already enabled and set to profile1 (the only other option)
I followed advice online and left the other options to auto
Updated BIOS and my motherboard (GA-Z68X-UD3P-B3) says it supports the following...
4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory
Support for DDR3 2133/1866/1600/1333/1066 MHz memory modules
No matter what I do I cant get it to run above that, I tried manually setting it to 21.33 but sometimes when I have XMP enabled or try doing that I get an error saying the system has experienced issues due to overclocking or change in voltages, if I press any key it boots normally but runs at 1333mhz
Any ideas?