Phanteks Ento Pro M (rebooting Problem)

Sturm · 28 Jul 2016 at 14:03

Is anyone using this case?
I got one from OCUK a few months ago and have noticed that everytime I pull off the front panel or fit the front panel and the PC is on it will reboot.
I don't think this is normal behaviour and wonder if perhaps I have something loose that causes this

Robzere31 · 28 Jul 2016 at 15:25

Your probably catching the reset button which is on the side.
Very easy to catch it if you remove the front while the PC is still running as the button is slightly raised.

Rustyone · 29 Jul 2016 at 11:15

If you don't use reset, doubt many do these days, just leave it disconnected.

Sturm · 29 Jul 2016 at 11:49

fixed it by filing the slots on the switch housing so it sits further back

Rustyone · 29 Jul 2016 at 12:46

Sturm said:
fixed it by filing the slots on the switch housing so it sits further back

Was it not sitting flush.

jbh110tdi · 30 Jul 2016 at 00:48

Ive got the same case ive managed to get the knack to taking the front panel off and fitting it without hitting the reset button but yea its easily done.

great case though

Sturm · 30 Jul 2016 at 15:13

Rustyone said:
Was it not sitting flush.

not quite flush, enough for the panel to touch on removal