Question about the Phanteks Enthoo luxe

Dannyboy84 · 20 May 2016 at 19:58

So I received my new case today the Phanteks Enthoo luxe, and I got a corsair h110i gtx aswel but I have a question.

The pwm fan hub that comes with the phanteks case requires being plugged into the cpu fan header on the motherboard and ofc so does the corsair cooler, which one should I connect to it and will the other work on another fan header?

Currently I'm using a 2 way adapter so both are plugged into the cpu header but I'm not sure if this is a good idea or not?

If anyone has any imput that would be great.

Thanks

Dannyboy84 · 20 May 2016 at 20:36

il take a look at manual, I'm sure the board will have more pwm headers, thanks

Dannyboy84 · 20 May 2016 at 21:21

So I have checked the manual, and it doesn't state if any of them are PWM headers, it just says that all the Fan headers are 4pin so I assume they are the same this included the cpu fan header when it talked about them in the manual will try it tomorrow and see how it works

Dannyboy84 · 21 May 2016 at 10:07

There wasn't a cpu 2 header so I plugged it into the system header 1 seems to be doing the job. actually I plugged it into sysfan 2 and that doesn't seem to work

Dannyboy84 · 24 May 2016 at 09:50

Thanks for this I didn't know about the pump so I will look at that with the Corsair link software

Dannyboy84 · 24 May 2016 at 12:15

iv used the link software to set the pump to performance and the fance to balance I am not overclocking till I have everything run correctly, my case fans are still running at max rpm. after reading the manual again it could be I need to have the hub connected to the sys fan 1 header, all headers are 4pin but not pwm if I have read it correctly so still some tinkering to do

Dannyboy84 · 24 May 2016 at 12:27

So should I not bother using it then as the corsair cooler needs to be connected to the cpu header and id say that has priority?

Dannyboy84 · 24 May 2016 at 12:57

what do you u mean by that sorry?

Dannyboy84 · 24 May 2016 at 13:04

ok il look into that thanks I think for the time being il plug the fans straight into the motherboard headers and see if it reduces the noise abit

Dannyboy84 · 2 Jun 2016 at 10:28

I have left it now not using at the minute but after messing with everything it turns out its actually the fans on my corsair h110 gtx and not the case fans, (got it at same time as case), when its on balance mode using link software the fans get above 1200 rpm it gets really loud