lost ocuk overclocking settings

stevewah · 7 Feb 2011 at 17:52

hi all can anyone help ......... i paid for this http://www.overclockers.co.uk/showpr...d=1917&subcat= and in loading up pc i am only getting the 3.30 not the 4.40 anyone know why is there an ocuk setting in the bios i can set ??

core speed underload is 3392.5 multiplier is @ x34 then steps down to 1596.5 with multiplier @ x16

stulid · 7 Feb 2011 at 17:53

is it the ASUS board bundle?

is the speed confirmed with CPU-Z? underload

stevewah · 7 Feb 2011 at 17:55

stulid said:
is it the ASUS board bundle?

na gigabyte ud4

stulid · 7 Feb 2011 at 17:58

Is there a saved user profile in the bios, with ocuk or similar as the name?

paradisiac · 7 Feb 2011 at 18:00

if you read the manual for the mobo, or it should even be obvious in the bios, there is a section for saved bios profiles, if they are all empty or it is set to the ocuk profile, then give them a ring.

stevewah · 7 Feb 2011 at 18:01

stulid said:
is it the ASUS board bundle?

is the speed confirmed with CPU-Z? underload

yes thats were i got speeds from

stevewah · 7 Feb 2011 at 18:02

paradisiac said:
if you read the manual for the mobo, or it should even be obvious in the bios, there is a section for saved bios profiles, if they are all empty or it is set to the ocuk profile, then give them a ring.

will have a look

stulid · 7 Feb 2011 at 18:02

on the BIOS main page, press F12, it should allow you to load from a profile, overclockers would have saved a profile with all the settings needed.

stevewah · 7 Feb 2011 at 18:04

stulid said:
on the BIOS main page, press F12, it should allow you to load from a profile, overclockers would have saved a profile with all the settings needed.

sweet will that work with my board

stulid · 7 Feb 2011 at 18:07

yes.

as long as there is a ocuk saved profile.

stevewah · 7 Feb 2011 at 18:23

sweet all sorted core speed back on 4390.0 with multiplier @ x44

when it come to our rma recall on our boards can i save that setting for new board or will i have to send it to ocuk ?

stulid · 7 Feb 2011 at 18:26

stevewah said:
sweet all sorted core speed back on 4390.0 with multiplier @ x44

when it come to our rma recall on our boards can i save that setting for new board or will i have to send it to ocuk ?

might be easier to ask them when you have to send it back if they can put the settings on the new board?

stevewah · 7 Feb 2011 at 18:51

was thinking that but when it comes to recall some peps was saying we might have to get new boards from gigabyte for speed rma's

pingu666 · 7 Feb 2011 at 19:35

you could write down or photo bios settings with a camera, then you could manualy input them later if you need too

stevewah · 7 Feb 2011 at 19:43

pingu666 said:
you could write down or photo bios settings with a camera, then you could manualy input them later if you need too

i was thinking that should be ok to do

stevewah · 7 Feb 2011 at 19:44

am thinking would my set up make it to 5ghz ?

stevewah · 7 Feb 2011 at 19:51

d post

stevewah · 7 Feb 2011 at 21:29

stevewah said:
am thinking would my set up make it to 5ghz ?

???? any one know ?

stulid · 7 Feb 2011 at 21:34

Not sure, but also you maybe better of in the overclocking section? i am sure someone will have done it before and help you tweak your system to get to these speeds.

Two guides here also,

http://www.bit-tech.net/hardware/cpus/2011/01/07/how-to-overclock-the-intel-core-i5-2500k/3

http://forums.overclockers.co.uk/showthread.php?t=18227651