MSI Afterburner 3.0.0 Beta 18(2014-01-02)

[LtMatt]

Change note:
• Added low-level I2C access driver for AMD Bonaire, Curacao and Hawaii graphics processors. Low-level I2C access driver provides much faster access to I2C bus than ineffective native AMD ADL I2C access interface and addresses issues with GPU clock throttling when enabling voltage monitoring on AMD RADEON R9 290 series graphics cards
• Improved AMD ADL access layer with Overdrive 6 support to provide compatibility with future AMD GPUs
• Regular and SE versions of MSI Afterburner are now merged into single installer. Added voltage control mode selection option to the “Compatibility properties” section in “General” tab. Now you can toggle between reference design, standard MSI and extended MSI voltage control modes
• Added “boost edition” / ”GHz edition” GPU type selection option for reference design AMD RADEON 7970 and AMD RADEON 7950 based graphics cards to “AMD compatibility properties” section in “General” tab
• Added GPU usage averaging algorithm for Overdrive 6 capable AMD GPUs. Now displayed GPU usage is being averaged by sliding window to smooth GPU usage artifacts occurring due to bug in AMD ADL API on AMD Sea Islands GPU family
• Added optional unified GPU usage monitoring path via D3DKMT performance counters. Power users may enable it via configuration file as a workaround to replace native vendor’s GPU usage monitoring if it is working improperly (e.g. broken GPU usage monitoring in AMD ADL API for AMD Sea Islands GPU family)
• Added “Use dedicated encoder server” option to “Videocapture” tab
• RivaTuner Statistics Server has been upgraded to version 6.0.0
• Included MSI Gaming skins

Download Link
http://download1.msi.com/files/downloads/uti_exe/vga/MSIAfterburnerSetup300Beta18.zip

Source
http://forums.guru3d.com/showthread.php?p=4735664&posted=1#post4735664

 

[~Mike~]

nvm answered my own question

 

[LtMatt]

I think its using an older version of RT, not 100% sure. The latest RT OSD build is beta 4 available on the guru3d forums.

 

[atomic7431]

Thanks for the heads up

 

[Drangueos]

Thx for it,

I was hopping for it to unlock voltage control on the MSI R9 280X, but no

 

[LtMatt]

Thx for it,

I was hopping for it to unlock voltage control on the MSI R9 280X, but no

Try this.

http://www.sendspace.com/file/e8ijf7

Make sure afterburner is not running. Open up the shortcut that says +140mv and double click it. Now restart afterburner. Unlock voltage control and monitoring via settings. Does it work now?

 

[whyscotty]

Cheers

 

[LtMatt]

Cheers

I was expecting you to post it. You're the afterburner Guru.

 

[Kanoe]

Cheers for the heads up will take for a spin later.

 

[ChrisD.]

It won't work, for the MSI card you need to flash this BIOS:

http://www.techpowerup.com/vgabios/146769/msi-r9280x-3072-131009.html

 

[noobftw]

the osd also displays in 64bit games now

 

[whyscotty]

I was expecting you to post it. You're the afterburner Guru.

 

[nniitt]

thanks for sharing

 

[humbug]

Download Link
http://download1.msi.com/files/downloads/uti_exe/vga/MSIAfterburnerSetup300Beta18.zip

Source
http://forums.guru3d.com/showthread.php?p=4735664&posted=1#post4735664

Change note:
• Added low-level I2C access driver for AMD Bonaire, Curacao and Hawaii graphics processors. Low-level I2C access driver provides much faster access to I2C bus than ineffective native AMD ADL I2C access interface and addresses issues with GPU clock throttling when enabling voltage monitoring on AMD RADEON R9 290 series graphics cards
• Improved AMD ADL access layer with Overdrive 6 support to provide compatibility with future AMD GPUs
• Regular and SE versions of MSI Afterburner are now merged into single installer. Added voltage control mode selection option to the “Compatibility properties” section in “General” tab. Now you can toggle between reference design, standard MSI and extended MSI voltage control modes
• Added “boost edition” / ”GHz edition” GPU type selection option for reference design AMD RADEON 7970 and AMD RADEON 7950 based graphics cards to “AMD compatibility properties” section in “General” tab
• Added GPU usage averaging algorithm for Overdrive 6 capable AMD GPUs. Now displayed GPU usage is being averaged by sliding window to smooth GPU usage artifacts occurring due to bug in AMD ADL API on AMD Sea Islands GPU family
• Added optional unified GPU usage monitoring path via D3DKMT performance counters. Power users may enable it via configuration file as a workaround to replace native vendor’s GPU usage monitoring if it is working improperly (e.g. broken GPU usage monitoring in AMD ADL API for AMD Sea Islands GPU family)
• Added “Use dedicated encoder server” option to “Videocapture” tab
• RivaTuner Statistics Server has been upgraded to version 6.0.0
• Included MSI Gaming skins

Good Grief. DL'ing now.

 

[Slipperz]

Thanks for this

 

[H@mmer]

I had beta 16 on and installed beta 18 today. Since 18 I've had 2 hard lockups on my PC while playing BF4. Never had hard lockups with BF4 before. I get a few crashes to the desktop etc .
I've gone to beta 17 with the RTS patch to get the 64 bit overlay on BF4. I'll see how I get on with this.

 

[noobftw]

myn seems to run fine at the moment

 

[Drangueos]

Try this.

http://www.sendspace.com/file/e8ijf7

Make sure afterburner is not running. Open up the shortcut that says +140mv and double click it. Now restart afterburner. Unlock voltage control and monitoring via settings. Does it work now?

Didn't work with this, but thx anyway

It is working with another MSI bios, I can change the voltage, I can see that it is lower because it is cooler and drawing less power, but I cannot get a voltage read from Afterburner and GPUZ is not showing the voltage drop.

 

[LtMatt]

Didn't work with this, but thx anyway

It is working with another MSI bios, I can change the voltage, I can see that it is lower because it is cooler and drawing less power, but I cannot get a voltage read from Afterburner and GPUZ is not showing the voltage drop.

I just noticed there is a new option to do with voltage control. Might be something to do with that?

 

[jinxpad]

Anybody tried this on non MSI boards?