The ASIC benching thread, what does yours boost up to ?

[Silent_Scone]

Stock and bios and voltage would make more sense here Kaap

 

[humbug]

Stock and bios and voltage would make more sense here Kaap

Wouldn't work for AMD as the boost is fixed no matter what the AISC.

 

[Kaapstad]

Stock and bios and voltage would make more sense here Kaap

I did think about it but there are so many non ref cards and bios that it would be difficult.

 

[MadMatty]

I don't think stock setting will show anything important as all the numbers will be near enough the same for any given card series.

It's all or nothing as you push the card to the limit and see how far your asic % takes you. In my case, not very far

 

[Kaapstad]

I don't think stock setting will show anything important as all the numbers will be near enough the same for any given card series.

It's all or nothing as you push the card to the limit and see how far your asic % takes you. In my case, not very far

Over time if we get enough results a pattern should start forming.

 

[humbug]

Its a good idea Kaap

 

[atomic7431]

 

[Aurhinius]

Here is mine -

Zotac AMP 980ti - Custom bios enabling 325W (130%) TDP only running using a Nzxt G10 with a corsair H110 water.

Very happy to see this thread I hope we get some support I really want to see whether ASIC really makes a difference. I suspect it makes a difference for VDDC but I have seen a throttle under air that I no longer see under water because my temps are always below 50c. With card temp you see a 13mhz throttle above 63c and again at 73c so if you can keep your card below these temps you instantly gain 26mhz overclock or 2 speed bins regardless of ASIC and all down to the way GPU boost 2 works on an NVidia cards.

 

[P.B]

That's a very good clock on that 980ti above

 

[Kaapstad]

We need the max figure for VDDC as well please.

 

[Joe!]

Hi, I hope this is sufficient, took the picture before realising you wanted a picture of the start screen:

Spoiler

Gigabyte G1 Gaming 980Ti
ASIC - 72.8%
GPU Clock - 1320MHz
Set Boost - 1409MHz
Max Boost - 1560MHz
Max Temp - 60c
Max VDDC - 1.243v

 

[Kaapstad]

Hi, I hope this is sufficient, took the picture before realising you wanted a picture of the start screen:

Spoiler

Gigabyte G1 Gaming 980Ti
ASIC - 72.8%
GPU Clock - 1320MHz
Set Boost - 1409MHz
Max Boost - 1560MHz
Max Temp - 60c
Max VDDC - 1.243v

The results screen is fine.

And on the scoreboard.

 

[Joe!]

Awesome, thanks!

 

[rolypolyman]

[/IMG]

i5 4690K @stock 3.5Ghz
Inno3D Air Boss Ultra X4 980Ti

 

[rolypolyman]

Are the Gpus not supposed to be stock settings?

 

[Joe!]

Kaap says:

The highest maximum clock you can manage without breaking anything.

 

[atomic7431]

We need the max figure for VDDC as well please.

Apologies re done -

 

[P.B]

that's a very good max boost on that G1

 

[atomic7431]

that's a very good max boost on that G1

i played dying light last night for about 3 hours and all was good so seems stable happy days

it does have occasional coil whine though

 

[P.B]

Also a very good score on heaven have you posted it yet ?My titan used to hold 3rd place on there, now down to 12th some of these 980ti's clock so well!