Saving Sessions / Demand reduction thread

Opted in, but we'll be cooking dinner, but I'll export whatever is spare, not having a late dinner for mere pennies.
 
I had a slight technical hitch, got home from work, checked my phone and the system was pulling house load from the grid, luckily the batteries were fully charged.

Seems I forgot to make the grid setpoint negative :cry: I had noticed that error last night, then forgot to fix it.

Consider that a complaint against the low rates. Pulled 1.2kWh, now discharging to grid at 5kWh as the oven etc is on.
 
Last edited:
I exported 3.7, I ended it 15 mins early as I didn't want to run out later tonight. In hindsight, I probably could have exported for the full session as I am still at 30% battery and the heat pump will drop off in 15 mins.
 
@john_smith

Not sure of the relevance of the number under the kWh/£ slider in the screenshot, but you may want to blank that bit out

Presumably your smart meter data hasn't uploaded, ask them to manually request the data, they will need to do two requests, one for import and one for export, it should then populate.Make sure they request both.
 
Last edited:
Ron-ski said:
@john_smith

Not sure of the relevance of the number under the kWh/£ slider in the screenshot, but you may want to blank that bit out

Presumably your smart meter data hasn't uploaded, ask them to manually request the data, they will need to do two requests, one for import and one for export, it should then populate.Make sure they request both.
Click to expand...

Cheers.

Yes I have already "x'd" them and had a reply.
 
You must log in or register to reply here.
Back
Top Bottom