• Notice regarding image hosts and attachments. See here.

  • Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

Thermal grizzly WireView pro ll

Thermal Grizzly Wireview PRO II lines showing as OOS on the OcUK web shop are currently on order with the vendor but we are in a backorder queue.

I have backorders in place that guarantee stock for customers who have active pre orders with us.

should be available in mid-late November.

In addition, we have very limited stock of the new Noctua editions.

Thermal Grizzly WireView Pro II GPU Normal - Noctua Edition​



Thermal Grizzly WireView Pro II GPU Reverse - Noctua Edition​

 
Last edited:
Been still debating whether to get a Wireview Pro II myself, but since I have an Astral 5090 I’m on the fence whether i’ll get worse resistances than what I’m getting by using multiple connections. My resistances are on my overlay at all times, and I use a 90% TDP.
 
Been still debating whether to get a Wireview Pro II myself, but since I have an Astral 5090 I’m on the fence whether i’ll get worse resistances than what I’m getting by using multiple connections. My resistances are on my overlay at all times, and I use a 90% TDP.

That’s why I just decided to upgrade my PSU and kill two birds with one stone.
 
I’m talking about using a Wireview adds an extra connection point, rather than 1. Which in itself is adding to more points of failure technically.

Yes. That’s why I got the MSI PSU that does the pin monitoring and auto shutdown all through the normal 12vphr cable.
I appreciate it costs a lot more though especially if you already have a decent PSU (gonna use my other as a spare)
 
You won't really be safe unless you're running a per pin monitoring PSU with a Corsair thermal protect power cable connected to a power rebalancing Ampinel plugged into a Wireview 2 Pro plugged into an Astral.

Until your VRAM dies.
 
If i had an Astral i really wouldn't bother with a Wireview Pro 2 just a good PSU that monitors current at the plug that side and the Astral for the GPU side otherwise you are just adding in another point of failure/ resistance to a system that is already way too temperamental , any other make of GPU i would class them as essential though .
 
I bought an Ampinel monitor as my PSU cannot monitor pin current, only a MSI MAG A1250GS.
MSI 5090 gaming trio OC, I haven't tweaked it.
Running 70% power loading in Afterburner.
Original MSI 12v cable to GPU

I noticed this in Ampinel software, unplugged and reconnected only once.
Yellow pins can bounce around. Not had an alarm.
Have noticed that the cable is a lot cooler since using the Ampinel, but should it not be more load balanced?
At idle, the lines sit ontop of each other.

Do I need a better 12v cable?

31530.webp
 
Just wiggled the cable out the PSU and look, you can see an immediate balance load.

This is the original MSI cable from brand new, under 1 year old. I guess its not very good.

What cable shall I buy to replace it, who makes the best one?

Untitled.webp
 
Just wiggled the cable out the PSU and look, you can see an immediate balance load.

This is the original MSI cable from brand new, under 1 year old. I guess its not very good.

What cable shall I buy to replace it, who makes the best one?

Untitled.webp

yeah new cable time going by the readings above , i have been happy with the Cablemod 12v-2x6 and is pretty tight for currant balance ( under 0.5amp per pin under load )... been fitted around 18months now
 
Last edited:
yeah new cable time going by the readings above , i have been happy with the Cablemod 12v-2x6 and is pretty tight for currant balance ( under 0.5amp per pin under load )... been fitted around 18months now
I've gone for the Corsair one, with thermal protection, but don't know if it will work with the Ampinel.
Also, didn't really need it if I have the Ampinel, lol.
But it was the same price as one without.

I did read Cablemod or Corsair.

No idea what's gone wrong in the MSI cable, its not curved that hard, just been sat there and not touched.
No idea how long it's been this bad, I had noticed it get warm, borrowed IR camera, which is why I bought the Ampinel, to see what's going on.
 
Anyone any good with XAML coding in Aqua suite?
Trying to find how the XAML code defines the sensor and live reading. Can't for the life of me work out how it's done!?

31597.webp
 
Just got the Thermal Grizzly II wired version which I had ordered a while ago.
I only have a 5080FE and I know I probably don't need one, but by the look of things, I'll not be spending any other money on my PC anytime soon.

Managed to get the current monitors added to my Turzx 5" display via AIDA64. the bars are scaled 0-7 amps.

screen.webp
 
Last edited:
Current imbalance warning being thrown up on my 5090 from my Wire View 2 and I was only plodding about in WoW, ran Furmark and alarm went off within 2 minutes, massive imbalances showing up, just inspected everything and at least everything looks clean, no scorch marks or anything lol, just replaced the native cable with a Corsair Thermal protect cable I had spare, running Furmark again now.

Fingers crossed.

Edit -

Seems new cable did the trick, man these 5090s certainly give your stress levels a work out, looks like the WireView 2 did it's job in pre-warning me so worth every penny.

Edit -

Had Furmark running for nearly an hour now pulling 600w on the GPU, all good and room is nice and warm!

The scary thing is how many people out there are running their 5090s with massive current imbalances and they don't even know it?

I bought the WireView 2 as a bit of insurance but didn't think I actually need it, I thought as long as my cable plugged in nice and snug I'm ok, obviously not.
 
Last edited:
Back
Top Bottom