hi all, so heres the deal i got chosen to test 2 Phobya G-Silent 12 1500rpm RED LED fans and here i am testing them
lets start on the aesthetic features of these fans:
firstly the box. the box is very well presented in my opinion and i especially like how the fan is shown, not to keen on the phobya logo though
now that the fans out of the box we can see it in full.
it has a high quality look and feel to it not your everyday tackey plastic fan,
the white cable braiding was also a nice surprise too as i have a fractal case and am getting white cables
now how it looks inside of the case:
first off lets see how dull and boring the coolit eco stock fan looks
in my opinion not very nice at all.
now lets compare it to the phobya fan
thats much better, you might not be able to see it on camera but the red led's have a nice almost warming glow to them and are not too in your face.
so first i tested these fans against the stock cooler of the cool it eco.
the first test was noise, heres a video of the noise that the cool it eco fan in a pull configuration on the rad makes along with the rest of the fans in the case.
as you can hear the cool it eco fan is the nosiest of the lot and i hate it!
now for 1 of the phobya fans
That is a lot quieter and so much more acoustically pleasing!!
now for 2 phobya fans in a push pull config
a little bit more noisy but still a lot more quieter than that stupid coolit fan
now for the temperature testing which may be slightly disappointing
now i had done videos of intel burn test running with temp sensors but they manged to corrupt them selfs so you will just have to take my word for it.
first things first my specs:
i5 2400
msi-z68a-gd80-g3
asus direct cu ii top 560ti
8gb corsair vengeance
ocz vertex 2 60gb +1tb samsung
also the other fans in my case are:
2x 140mm fratcal fans
1x 120mm fractal fan
so i ran intel burn test on standard for 5 loops.
the temps were:
on the standard coolit eco fan - highest recorded temp was 53C
on 1 phobya fan - highest recored temp was 55C
on 2 phobya fans in push pull - highest recorded temp was 52C
so as you can see the coolit eco fan vs the phobya fan 1v1 the cool it fan offers better cooling capabilities, this is expected due to the cooling fan having a higher rpm however this is at the price of an awful noise!
here are the pros and cons of both fans
coolit fan
pros:
Good cooling capabilities
cons:
ugly
noisey
no cable braiding
phobya fan's
pros:
quiet
good looking
cable braiding
nice led's
con's:
not as good cooling capabilities.
over all i find the phobya fans to be much more aestheticly and acoustically pleasing and as a result of that i have another on preorder and i have also order some more phobya products
Now i know this may not be the best review about and it has a few things missing but this is my attempt and its my first review so enjoy and thanks for reading
lets start on the aesthetic features of these fans:
firstly the box. the box is very well presented in my opinion and i especially like how the fan is shown, not to keen on the phobya logo though
now that the fans out of the box we can see it in full.
it has a high quality look and feel to it not your everyday tackey plastic fan,
the white cable braiding was also a nice surprise too as i have a fractal case and am getting white cables
now how it looks inside of the case:
first off lets see how dull and boring the coolit eco stock fan looks
in my opinion not very nice at all.
now lets compare it to the phobya fan
thats much better, you might not be able to see it on camera but the red led's have a nice almost warming glow to them and are not too in your face.
so first i tested these fans against the stock cooler of the cool it eco.
the first test was noise, heres a video of the noise that the cool it eco fan in a pull configuration on the rad makes along with the rest of the fans in the case.
now for 1 of the phobya fans
now for 2 phobya fans in a push pull config
now for the temperature testing which may be slightly disappointing
now i had done videos of intel burn test running with temp sensors but they manged to corrupt them selfs so you will just have to take my word for it.
first things first my specs:
i5 2400
msi-z68a-gd80-g3
asus direct cu ii top 560ti
8gb corsair vengeance
ocz vertex 2 60gb +1tb samsung
also the other fans in my case are:
2x 140mm fratcal fans
1x 120mm fractal fan
so i ran intel burn test on standard for 5 loops.
the temps were:
on the standard coolit eco fan - highest recorded temp was 53C
on 1 phobya fan - highest recored temp was 55C
on 2 phobya fans in push pull - highest recorded temp was 52C
so as you can see the coolit eco fan vs the phobya fan 1v1 the cool it fan offers better cooling capabilities, this is expected due to the cooling fan having a higher rpm however this is at the price of an awful noise!
here are the pros and cons of both fans
coolit fan
pros:
Good cooling capabilities
cons:
ugly
noisey
no cable braiding
phobya fan's
pros:
quiet
good looking
cable braiding
nice led's
con's:
not as good cooling capabilities.
over all i find the phobya fans to be much more aestheticly and acoustically pleasing and as a result of that i have another on preorder and i have also order some more phobya products
Now i know this may not be the best review about and it has a few things missing but this is my attempt and its my first review so enjoy and thanks for reading
Last edited: