Slames Rig

CK-Slame · 2 Mar 2012 at 19:54

Slames Rig - My Personal Perfect Lan Case

Final result

here is the story and more pix in the end

Here we go folks ...

i think it´s time to start a little bit in here. :-)

I even promised to some OcUK guys to post pictures as soon as i rebuild my rig.

If you got any questions just ask.

Right now i start with sleeving the PSU .... For those who don´t know how to do here you got my tutorial vids.

Prepare to fight, here are all contestants:

First cut the shrink to same size, then i start sleeving.

These should be enough ... all 20 mm

Cheers

Stefan aka Slame

additional infos :

Hardware:

Lian Li V351 iron grey
ASRock Extreme 4-M Mainboard
Intel i7 3930K
16 GB Corsair Ram
XFX 6870 graphics card
DVD Writer
2 TB Western Digital for storage
120 GB Samsung SSD for system
Seasonic X850 Watts semipassive
Gigabit switch
full watercooling on everything
240 radiator + 80 radiator and external option for home use
aqua computer cuplex rev 1.3 silver edition
2 x twinplex silver edition
watercool mosfet cooler
aqua computer Eheim 600 pump "aquaduct edition"
aquaero lt

and yes .. all in the V351

Shovinus · 2 Mar 2012 at 20:40

Can't wait to see this with your system Slame

make sure you post the whole build up, I think it is going to look great.

CK-Slame · 2 Mar 2012 at 20:44

Will do so.

stulid · 2 Mar 2012 at 21:01

Subscribed to this :cool:

CK-Slame · 2 Mar 2012 at 23:06

Just a short shot within the sleeving ... pro tip: never watch television while sleeving, it takes longer. :rolleyes:

Shovinus · 3 Mar 2012 at 00:14

Haha Slame its going to look so cool, especially with that board, I think I gotta sleeve mine properly as well.

ch3333z · 3 Mar 2012 at 12:35

Wow nice work on the sleeving! Also very impressed by how you get this out of the way first. There is always procrastination on my part when this needs doing

CK-Slame · 3 Mar 2012 at 12:59

Already did the 8-Pin cable too. Now going to Olympiastadion, so continuing in the evening. Did put some extra information in the first post.

Schizo · 3 Mar 2012 at 13:30

nice guide on the braiding slame.

im also just about to start braiding my 1000 watt psu and have been looking at some of these tool's you use.

they look very very good at removing the pins and make light work of the process.

cant wait to see the next update

CK-Slame · 3 Mar 2012 at 20:30

schizo said:
nice guide on the braiding slame.

im also just about to start braiding my 1000 watt psu and have been looking at some of these tool's you use.

they look very very good at removing the pins and make light work of the process.

cant wait to see the next update

I once created them and they are sold via Caseking. ModMyMachine is me. There are cheaper ones on the market though, but Nothing beats Made In Germany (or UK) ;-)

Schizo · 3 Mar 2012 at 20:45

good point about "made in germany"

how many tool's would one need to complete a full braiding of a case ?

as ocuk are now owned by caseking,will we see these tool's in the uk shop ?

i want some but getting them from germany would cost a fair bit.

CK-Slame · 3 Mar 2012 at 22:36

Don´t know. Honestly people tend to buy the cheaper ones as they usually use them for one PSU only.

ZZZAC · 3 Mar 2012 at 22:37

good tutorials, just braided like 5 fans cuase i could

CK-Slame · 4 Mar 2012 at 11:38

Finished the PSU ... 20m of each colour btw.

now preparing the board and the silver waterblocks. First some polishing.

King Damager · 4 Mar 2012 at 11:43

That's some pretty cool sleeving right there

As you're in Germany, are you using MDPC braid?

For Schizo, I know you looked into MDPC braid (or I think you did), and the ATX pin removal tool they do is really quite good. Haven't managed to get a molex removal tool yet though.

Looking forward to this though

kd

Shovinus · 4 Mar 2012 at 11:47

Are we nick naming this Bumble Bee?

Looks good Slame. Have you decided what color fluid you are going to use? I am actually looking at getting some white and red sleeving now for my build

(To make it match with my desk basically)

CK-Slame · 4 Mar 2012 at 12:58

board with CPU, NB and mosfet coolers.

J-FRO · 4 Mar 2012 at 13:04

Oh my, this is looking like its got epic rig written all over it! Subbed!

CK-Slame · 4 Mar 2012 at 13:23

Board mounted on mobo tray with aquaero LT attached at the ventilation slots.

I already precabled for the fans

one closeup shot of the Cuplex .. need to shoot more straight :-)

CK-Slame · 4 Mar 2012 at 13:30

I agree with the products.