• Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

AMD Catalyst 12.11 Official BETA 11 Plus CAP2 12.11

Soldato
Joined
25 Nov 2011
Posts
20,680
Location
The KOP
Here it is guys FC3 performance driver :)
Improves performance in Far Cry 3 (up to 25% with 8xMSAA, SSAO enabled @ 1600p, and up to 15% with 8xMSAA, HDAO enabled @1600p) (AMD Catalyst 12.11 CAP2 must also be installed)
Resolves a sporadic system hang encountered with a single AMD Radeon HD 7000 Series GPU seen on X58 and X79 chipsets.
Resolves an intermittent hang encountered with AMD Radeon HD 7000 Series GPUs in a CrossFire Eyefinity setup.
Resolves image corruption found in certain DirectX 9.0c titles
Resolve missing fonts issue in XBMC
Resolves no video issue found in Media Player Classic Home Cinema when using full or half floating point processing
Resolves stability issues found in the previous AMD Catalyst 12.11 Beta8 driver for Linux
For users experiencing issues with HDMI Audio under Ubuntu 12.04, users should try installing the “dkms-hda - 0.201211291615~precise1” package from https://code.launchpad.net/~ubuntu-a...aily/+packages and reboot; this will resolve the HDMI Audio issue found in Ubuntu 12.04

Driver
Use This One Lets you pick OS version better .NET Etc
http://support.amd.com/us/kbarticles/Pages/AMDCatalyst1211betadriver.aspx

http://forums.guru3d.com/showthread.php?t=370055

CAP2
http://forums.guru3d.com/showthread.php?t=371842

Improves Far Cry 3 performance for single GPU configurations with AA enabled
 
Last edited:
Thanks OP. I'll install these tonight.

I'm fairly new to AMD, do I need to install these 'CAPs' too. I assumed they were for Xfire or something and that you only need the driver for single card set-ups.
 
I'm fairly new to AMD, do I need to install these 'CAPs' too. I assumed they were for Xfire or something and that you only need the driver for single card set-ups.

You should install them for single and CrossFire setups.

The latest CAPs for example "Improves Far Cry 3 performance for single GPU configurations with AA".
 
I pity the fool that doesn't use caps on a single gpu setup.

*Resolves a sporadic system hang encountered with a single AMD Radeon HD 7000 Series GPU seen on X58 and X79 chipsets.* This is an important fix. Well done AMD.

Downloading now thanks.
 
Have they skipped Beta 9 and 10? Because i checked over the weekend for a new Beta and it still had Beta 8 listed.
 
I pity the fool that doesn't use caps on a single gpu setup.

*Resolves a sporadic system hang encountered with a single AMD Radeon HD 7000 Series GPU seen on X58 and X79 chipsets.* This is an important fix. Well done AMD.

Downloading now thanks.

Agreed, I have been pulling my hair out over this when I only use one car for games.

I wonder if they have fixed not being able to create gaming profiles in the CCC?
 
Rolled back to test out CrossFire on the 12.8's in BF3 last night as it looked better than the 12.11's only to find out CrossFire was gubbed after the new patch, hope it's fixed!

Oh and thanks op. :)
 
Not noticing much difference with these drivers and caps in fc3, if anything it's running a little worse.
 
Yeah mate, but made another daft mistake. I forgot the new driver would reset my overclocks :o

Also need to turn off the enhanced clock on asus gpu tweak then back on again for it to go past 1050mhz again and now it's golden :)

Performance seems to be up a bit for FC3, getting minimums of around 36-38 now instead of 32 on ultra preset, 1920x1080 & x2 MSAA - on a 7850.
 
Last edited:
That's good to know :-) I played with a mix very high, ultra if I can keep solid 60 ill be very happy lol
Online stutter tho I don't think will be fixed unless a patch comes out, I have friends with nvidia cards also getting stutter online.

Yeah mate, but made another daft mistake. I forgot the new driver would reset my overclocks :o

Also need to turn off the enhanced clock on asus gpu tweak then back on again for it to go past 1050mhz again and now it's golden :)

Performance seems to be up a bit for FC3, getting minimums of around 36-38 now instead of 32 on ultra preset, 1920x1080 & x2 MSAA.
 
Back
Top Bottom