XSPC H2 TITAN TRI-SLI GOODNESS

whyscotty · 3 Apr 2013 at 12:16

TITAN TRI-SLI GOODNESS

Been considering which Case to buy, so I can transfer this -

Uploaded with ImageShack.us

Into a new home

This arrived today - Click Me

Uploaded with ImageShack.us

Can't believe how light it is :eek:

More piccy's to follow as building the case this evening

whyscotty · 3 Apr 2013 at 12:36

Rig consists of the following -

Rampage IV Extreme
3930K
3 x Titans
Corsair Dominator Platinum 2133@2400
2 x Samsumg SSD's
Corsair AX 1200i
Win8 Pro

XSPC Tower H2+ case
1 x XSPC RX480
1 x XSPC RX360
1 x XSPC RayStorm Copper CPU block
3 x XSPC Titan blocks and back plates
2 x XSPC Flow bridges
2 x XSPS D5 Dual Bay Res/Pump combo's
2 x Aquacomputer D5 Pump Motor w/ USB and Aquabus Interface
2 x XSPC Sensor displays

4 x Scythe 1450's
3 x Noctua NF-F12 PWN
1 x Askasa 6 way Fan controller

16 x EK PSC Compression Fittings
8 x EK PSC Adapter Rotary 45 Deg
4 x EK PSC Adapter Rotary 90 Deg
4 x Koolance VL3N-M13-19S
4 x Koolance VL3N-F13-19S
2 Metres Masterkleer Red Tubing 1/2"ID - 3/4"OD
2 Ltr Mayhems Pure H2O
Mayhems Biocide

Yaayuh! · 3 Apr 2013 at 12:53

This should be a good'n

DaleTheWhale · 3 Apr 2013 at 13:33

Very intrigued!

Vore · 3 Apr 2013 at 13:34

Looking forward to seeing the transferred product!

pgi947 · 3 Apr 2013 at 14:24

Looking forward to this

whyscotty · 3 Apr 2013 at 14:45

pgi947 said:
Looking forward to this

So am I

Yaayuh! · 3 Apr 2013 at 14:52

Been over 2 and half hours already. Make with the pictures already

go go go!!

pgi947 · 3 Apr 2013 at 15:03

It's surely going to take him 3 hours to assemble the flat packed aluminium garden shed

Kaapstad · 3 Apr 2013 at 15:35

I am looking forward to this, I did look at this case as well but they did not have any in stock at the time.

whyscotty · 3 Apr 2013 at 16:07

Well first impressions

Didn't know what to expect with this case, but very impressed with how it is packaged

Each and every item individually wrapped in plastic and bubble wrapped.

They have thought of everything

Even down to the white gloves

Uploaded with ImageShack.us

Uploaded with ImageShack.us

Now to start putting it together

RogerMesenseless · 3 Apr 2013 at 16:09

You're a nutter!

whyscotty · 3 Apr 2013 at 16:13

SoundDoctor said:
You're a nutter!

Thank you

It comes to me quite naturally

Kaktus69 · 3 Apr 2013 at 19:05

Loved the Switch build, looking forwards to seeing the H2 in all its glory

pgi947 · 3 Apr 2013 at 19:07

You got the case assembled yet Scotty or are you still busy doing Michael Jackson impressions in the mirror with those white gloves?

whyscotty · 3 Apr 2013 at 19:34

So far so good

Uploaded with ImageShack.us

Uploaded with ImageShack.us

Did hit a snag with the drive bay cage, the screws holes had been countersunk too much so couldn't secure properly.

Thank god for synthetic washers

Any marks you can see on the front panel is chalk dust

Uploaded with ImageShack.us

Uploaded with ImageShack.us

Can any one spot the difference?

pgi947 · 3 Apr 2013 at 20:27

You un-inverted the motherboard tray?

Looking good though

whyscotty · 3 Apr 2013 at 20:29

pgi947 said:
You un-inverted the motherboard tray?

Looking good though

Correct, its all pre - cut/threaded so you can chose

7 thumb screws and its swapped - no mention in the manual :confused:

oggiet · 3 Apr 2013 at 21:20

Loving the look of that case, this is gonna be quality !!

Kaapstad · 3 Apr 2013 at 21:47

Looking good, how long do think before you are up and running.

XSPC H2 TITAN TRI-SLI GOODNESS

Vore

Vore