MONSOON HARDLINE RANGE UPDATE

rjk · 9 Jun 2014 at 16:40

Hi Guys

We have a new load of Monsoon SKUs going live today.

Included in this are:

Monsoon Fittings » Hardline Acrylic Fittings (3/8 - 1/2)

These fittings come in Free Center and Chaingun flavours.

Monsoon Fittings » Hardline Acrylic Fittings (1/2 - 5/8)

Again, available in Free Center and Chaingun varieties.

Monsoon offer the most secure and comprehensive acrylic tubing fastening system on the market right now and everything in their hardline range is so over engineered, you would be forgiven for thinking they are more than just computer parts.

There is a brilliant video here that shows how the Hardline 'Hardlock' system works.

GiraffePencils · 9 Jun 2014 at 16:58

Damn, Looks good,

If there's still stock on payday it's gonna be present to self day

flame696 · 9 Jun 2014 at 18:38

they look quite good might have to change from normal tubing to acrylic when i re-do my loop

Hotwired · 10 Jun 2014 at 02:59

That video.

Absolutely ghastly camera idea, watched most of it and quit before I became too queasy.

Product seems fine in design I'll add.

AkiraZero · 11 Jun 2014 at 21:29

Any way you can see if you can sell the spare Acrylic Lock Caps too? I am in need of some but the only place to get them is all the way from America, which is not exactly handy if your wanting to re-use your fittings!

tipes · 11 Jun 2014 at 22:22

Hotwired said:
That video.

Absolutely ghastly camera idea, watched most of it and quit before I became too queasy.

Product seems fine in design I'll add.

Quite frankly the camera person should be taken out the back and shot - just could not keep a steady shot, perhaps they were p****d. either way - awful.
Does not however detract from what looks like an excellent product, may have a go with this on my next loop re build.

Mark

rjk · 11 Jun 2014 at 22:40

AkiraZero said:
Any way you can see if you can sell the spare Acrylic Lock Caps too? I am in need of some but the only place to get them is all the way from America, which is not exactly handy if your wanting to re-use your fittings!

Will be adding to the range soon

AkiraZero · 17 Jun 2014 at 20:52

Good good, totally screwed up on the routing and went to what i thought was the inlet but apparently the top is the outlet(gravity was not a design factor obviously), mega fail since once the caps are glue'd on your stuck with it!

vampsthevampyre · 18 Jun 2014 at 09:03

Do you sell the additional acrylic end pieces, bit scared that i might mess one of the ends up and I always like to be covered for my mistakes

GiraffePencils · 18 Jun 2014 at 09:10

@Akira
You have 2 res?

@vampsthevampyre
2 posts above your's

rjkoneill said:
Will be adding to the range soon

AkiraZero · 18 Jun 2014 at 10:08

GiraffePencils said:
@Akira
You have 2 res?

I do indeed, thought I'd try something a little different

GiraffePencils · 18 Jun 2014 at 11:58

It's a really nice bend you've done between them, Shame about the input/output

AkiraZero · 18 Jun 2014 at 12:50

GiraffePencils said:
It's a really nice bend you've done between them, Shame about the input/output

Thanks, it took 3 lots of tube to get perfect and when I switched it on and it started going backwards I almost cried haha!
Had to take the whole thing apart and put my old parts in the case while I wait for these plastic lock caps! Shame there isn't spare ones included really!

somethingbrite · 3 Aug 2014 at 12:59

Sorry to bump this old post, is there any news / ETA on the Acrylic Locking Collar parts? Would be really handy to be able to get my hands on some of these in UK/Europe. :-)

paulstung · 3 Aug 2014 at 20:49

I'm in the same boat mate, I need some of the collars too. There is a stockist in the UK, but I can't mention them mate, they are quite special though....

kaka4200 · 4 Aug 2014 at 08:51

I really like the design. They are a bit overpriced....but then again u do get quality monsoon products

rjk · 4 Aug 2014 at 09:02

somethingbrite said:
Sorry to bump this old post, is there any news / ETA on the Acrylic Locking Collar parts? Would be really handy to be able to get my hands on some of these in UK/Europe.

paulstung said:
I'm in the same boat mate, I need some of the collars too. There is a stockist in the UK, but I can't mention them mate, they are quite special though....

Lock collars are on order and due any week now.

I will have them live to order when they give me a firm ETA.

GiraffePencils · 4 Aug 2014 at 10:04

I'll probably take some collars to have handy when they come in.
How will they be sold?
6 pack?
12 pack?

rjk · 4 Aug 2014 at 12:38

Monsoon Hardline Acrylic Lock Collars for 3/8 x 1/2 (13mm) Tube - 6 Pack @ £4.99 inc VAT

A six pack of our molded acrylic lock collars used with our Monsoon Hardline Premium Fittings.

For use with our 1/2” OD (13mm) acrylic tube and our 3/8” x 1/2” (13mm) Premium Hardline compression fittings.

Only £4.99 inc VAT.

ORDER NOW

Monsoon Hardline Acrylic Lock Collars for 1/2 X 5/8 (16mm) Tube - 6 Pack @ £4.99 inc VAT

A six pack of our molded acrylic lock collars used with our Monsoon Hardline Premium Fittings.

For use with our 5/8” OD (16mm) acrylic tube and our 1/2” x 5/8” (16mm) Premium Hardline compression fittings.

Only £4.99 inc VAT.

ORDER NOW

red eye · 6 Aug 2014 at 17:42

rjkoneill said:
Monsoon Hardline Acrylic Lock Collars for 3/8 x 1/2 (13mm) Tube - 6 Pack @ £4.99 inc VAT

A six pack of our molded acrylic lock collars used with our Monsoon Hardline Premium Fittings.

For use with our 1/2” OD (13mm) acrylic tube and our 3/8” x 1/2” (13mm) Premium Hardline compression fittings.

Only £4.99 inc VAT.

ORDER NOW

Monsoon Hardline Acrylic Lock Collars for 1/2 X 5/8 (16mm) Tube - 6 Pack @ £4.99 inc VAT

A six pack of our molded acrylic lock collars used with our Monsoon Hardline Premium Fittings.

For use with our 5/8” OD (16mm) acrylic tube and our 1/2” x 5/8” (16mm) Premium Hardline compression fittings.

Only £4.99 inc VAT.

ORDER NOW

by using these would I be able to use my premium soft tube fittings?

** MONSOON HARDLINE RANGE UPDATE **

MONSOON HARDLINE RANGE UPDATE