100% GPU Fan Problem

Associate
Joined
21 Jan 2004
Posts
161
Location
Planet Krypton
Hey guys. I don't really expect a reply here over christmas, but i'll throw up a thread anyway.

The Scenario:

I've had a problem when powering up my computer at boot, the GPU (Geforce 275 896MB) just powers at 100% fan, and the computer doesn't post on occassion. Although 9/10 it will post after a long period of 100% fan, this feels really wrong. 10-15seconds.

I've included a screenshot of my setup. As you can see i've got a nice overclock that is running stable in Games, with load temps of 50c. I have the Corsair H50.

My Bios settings that i've set manually are: Multiplier 18x, CPU Voltage, 1.400v, NB Voltage 1.20, (It goes red text when 1.30v), DRAM 1.9v, everything else Auto or stock.

Today I switched my computer on and it 100% fan'd for ages, and didnt work. I only fixed it by taking on the GPU, and then resetting my BIOS.

How can I fix this annoying problem? Is it my graphics card? It did the same exact thing on my last board.

Merry Christmas and if your bored, help!!

http://www.macfadyen.org/desktop_settings.jpg
 
My computer does not post/boot sometimes, and the GPU fan spins at 100%. Sometimes it takes 10-15 seconds at 100% before it boots, sometimes it just spins at 100% for more, and I switch it off.
 
The thing is, it DOES post, after a expanded amount of time, and i've played lots of games, Crysis on high etc, no problems. It just intermittently stops posting/working and I have to reset CMOS/take card out.

It hasn't been moved or anything.
 
I've got a 650W CoolerMaster Silent Pro. I do mean to check the O/c, been have been busy with christmas. It's the same problem without the OC, and also, with a different motherboard/CPU combo. Same RAM, though.

That USB device you mentioned sounds interesting!
 
I don't think I have extended memory checking on..

I've tried increasing my NB voltages.

I think I might try a random PCI-E card, see if it's the same.

I can then blame the card?
 
Back
Top Bottom