• Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

10700 new CPU Thermal Throttle at 65c!

Huggie86

Huggie86

Huggie86

Associate
Joined
10 May 2012
Posts
1,947
Hey guys,

Built my brother a small PC just gonna be used for streaming and browsing etc. Its a 10700 non K model and an H410M Motherboard. Just got it all up and running no gfx card yet as hard to get hold of.

For some reason the CPU is throttling at 60-65c. I've tried updating Bios and all drivers done a fresh install.

It goes up to 4.6ghz all core for about 40 secs then in the Intel Extreme Tune software it flags up Thermal Throttle and it then jumps from 700mhz to 4ghz bouncing around all over the shot.

Any one got any ideas??
 
@Danny75 Its a Gigabyte H410M the CPU is being cooled by a Noctua U12s. I know this CPU can't be overclocked but shouldn't be having thermal issues at 60c. I've tried mucking around with the p1 and p2 states and can't seem to sort it :(
 
@Danny75 I'll aim a fan at it now. I wouldn't mind if it set it down at a set frequency. But jumping from 700mhz then back up again constantly is stupid.

H410M S2H I just want it running the cpu at stock. Trying to see if there is board limits or something in bios.
 
Danny75 said:
Yeah probably some setting in the BIOS to remove the power limit.



Certainly wouldn't risk so much power draw on that board but apparently it can be done.
Click to expand...

Any idea what this setting is called? I'd be happy just it sitting at 4ghz all core instead of jumping down to 700mhz
 
@Danny75 No luck with anything. I've tried changing the PL1 and PL2 limits in Bios to increase boost power. No sign of anything to do with power limiting in bios, looked all through the advanced settings.

After 30-40 secs running CPUZ bench or intel tune bench the temp gets to around 60ish and then Thermal Throttle flags up in the Intel tune software and the CPU goes from 7W back to 65W over and over again while the clock speed is all over the place.

Also in Throttle stop software it keeps saying BD PROCHOT every time the CPU falls back to 7W.

I don't get this all saying the CPU is hot when its temps are low 60s.
 
Nope none, Anything that I saw with limit has been disabled. I just got HWinfo on and notices the Vrm Mos are hitting 100c, would this cause the issue I'm seeing? Anyway to lower the voltage going into them easy?
 
You must log in or register to reply here.
Back
Top Bottom