10850K OC settings check

[Corex91]

Hello everyone.

Im new here, but i just got an 10850K and is in progress of overclocking it a bit

can someone tell me if these settings are good or bad?

First specs.
10850K
Asus Z490 Gaming-F
LPX 3600Mhz CL18 1.35V

Current bios settings

Core ratio - 51
AVX - 0
Set Vcore 1.320V (Fixed)
LLC - 6
MCE - Enabled - remove all limits
Vccio and Vccsa - Both 1.15v
CPU SVID Support - Disabled
BCLK Aware Adaptive Voltage - Disabled
Cpu Current Capability - 170%
Cpu core/cache current limit - Maxed
Long duration/Short Duration - Maxed
Package power time window - Maxed

Cpuz and HWinfo
Vcore idle - 1.314V
Vcore Load - 1-305-1.314V
70-75 Degree celsius

have not had a crash with these settings, but im not really sure about the LLC, i so confused on that topic, does not seem to understand the LLC nomatter how much im reading or watch explanation videos about it.

so i would be very pleased if someone could tell me if the settings are any good


Thx

 

[darket]

Looks spot on to me. The lower the LLC the more the voltage droops under load the higher the less it drops under load . LLC really matters the most when using adaptive/offset voltage modes . LLC 6 seems to be the sweet spot for fixed voltages on Asus z490 boards.

1.320v and 5.1 id good for a 10850k , that's average 10900k territory

 

[Corex91]

Thanks man, the thing i was worried about the most was the llc because i read some stuff about the voltage spikes on Z490 boards, but if it dosent matter that much on fixed voltage, then im more relaxed

i have another post going to, and someone said to drop the LLC a notch or two, so i dropped it to llc 5 and bumped the voltage to 1.325V so its stable again, now Cpuz shows 1.323V Idle
And 1.279V on load, is that any better or is it about the same?

 

[Adam_101]

1.32 for 5.1 is good! .

I have the same cpu and can get 5ghz at 1.30. But 5.1 needs 1.36 minimum!

 

[Destination]

Good now both of you cinebench r23 them and post in the thread for some Intel representation!