140mm to 120mm adapter for H60

Wepohn

Wepohn

Wepohn

Associate
Joined
15 Nov 2010
Posts
321
Hey guys, I was originally going to get the Corsair 650d but I've decided I'm going to go with the Cubitek XL Tank. The only problem with this case is that the rear exhaust only has mounting holes for a 140mm fan. Does anyone know of any good adapters that will allow me to mount the H60?

Thanks (L) xox

Also jus' to double check... as I'll only be using the 1 HDD and 1 SSD I plan on removing the hard drive cages and mounting the HDD in the 5.25 to 3.5 bay converter, will this work?

More kisses xox
 
Koolance do an adapter, but OcUK don't stock them.
I've got one, its got a nice polished aliminium finish to match the interior of your case, not that you'll be seeing it :p

Google "140mm to 120mm adapter".

Unless your SSD is a 3.5" version you will need a 5.25" to 2.5" adapter (or 5.25" to 3.5" then another 3.5" to 2.5")
But yup no issue with it!
 
will you be removing the two 2.5" drives by removing the HDD cage (i've had a look and i cant work out if you will or ont)

if you are then you can pick up a converter that will take 1 5.25" bay into one 3.5" bay and one 2.5" bay, which will house your HDD and SSD.

not sure if OcUK do them but ive seen them around
 
R088ieS86 said:
Koolance do an adapter, but OcUK don't stock them.
I've got one, its got a nice polished aliminium finish to match the interior of your case, not that you'll be seeing it :p

Google "140mm to 120mm adapter".

Unless your SSD is a 3.5" version you will need a 5.25" to 2.5" adapter (or 5.25" to 3.5" then another 3.5" to 2.5")
But yup no issue with it!
Click to expand...

Thanks, this is pretty much perfect :D

Reaper 392 said:
will you be removing the two 2.5" drives by removing the HDD cage (i've had a look and i cant work out if you will or ont)

if you are then you can pick up a converter that will take 1 5.25" bay into one 3.5" bay and one 2.5" bay, which will house your HDD and SSD.

not sure if OcUK do them but ive seen them around
Click to expand...

Nah, the mounts for the 2.5" drives remain when the HDD drives are removed.
 
I noticed that the cutout for the Koolance adapter seems to be for a 140mm fan. As I'll be using a 120mm fan there will be a little space at each side. How will this affect performance?

Or would I be better getting one of the tunnel type adapters? (Ugly, I like the Koolance one :D)
 
You must log in or register to reply here.
Back
Top Bottom