• Notice regarding image hosts and attachments. See here.

  • Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

1900XT underperforming?

  • Thread starter Thread starter raf
  • Start date Start date

raf

raf

Associate
Joined
25 May 2004
Posts
483
Location
Northamptonshire
Greetings.

I've just installed my new mobo/gfx card and after formatting, my scores in 3dmark 03 seem rather underwhelming. With everything at stock I'm getting ~17200 and with my cpu running at fx55 speeds/card running at XT-X speeds I can only get as high as 17700. This seems a bit low as with my old card (6800 Ultra AGP) I could hit 13700 with everything at stock.

Sorry for using an older 3dmark, it's because it was the only one I ever used with my old card as I'm not a big bencher and I wanted to have a direct comparison between the two. I'm mainly posting this in the hope that someone who's more up to date with ATI cards, their cp settings and the PCI-E format in general can tell me if I'm missing something as I'm rather out of touch having used my old ultra since it's launch.

I'm using the 6.8 cats (cp version) and have the following d3d settings in use when running 3dm:

AA/AF/AF method at application preference.
Texture pref and Mipmap detail at high performance.
VSync always off.

I have the clocks all set correctly thanks to the sticky here using ati tool and full specs are in my sig. All I've changed in the bios has been the cpu speed and I disabled the onboard sound as nothing else seemed amiss there.
 
Aye, all the mobo drivers from the asus nforce4 cd installed and I use a 460w PSU, the card is on it's own wire (rail?) with nothing else sharing the same lead.
 
It's a fresh install - I was going to try and just carry on with my old install but unfortunately XP decided against booting :)
 
DC Ouput

+3.3v - 34A
+5 - 40A
+12V1 - 16A
+12V2 - 15A
-12V - 0.8A
+5Sb - 2.5A
+3.3V & 5V - 280W

Total power - 470W.

I initially tried the standard drivers without atitools but that left me with the same score and I'm sure atitools is working as I got the small boost when clocking from XT to XT-X speeds - I also have it play a sound when entering 3d mode.

The two ati processes are also disabled as instructed in the overclocking sticky. This really is baffling me now as I can't think of anything I've done differently with this system compared to any of my other ones after a format.
 
After uninstalling all the chipset drivers and the ati ones, and reinstalling various display/mobo drivers I'm still on ~17,500 at XT-X speed but stock cpu speed. From what I've seen on various sites I should be aiming for about 19k at those settings, at least it's not that far off I guess but it's still a little frustrating. :)
 
It's an Enermax Noisetaker ATX 12V Ver. 2.0 470W, but I'm not sure how to check the rail voltages. It was always fine for my ultra and there have been no stability problems at all with this new card, just slightly low performance - wouldn't power problems lead to locks/loss of signal?
 
10636 in 05, is that low?
I'm using the latest omega drivers, my cpu is at stock, and the XT is set to run at 650/725 in ATITool. I'm pretty sure it's changing the speeds as it plays a .wav as it drops in and out of 3d mode as 3dm starts and ends (the ati processes are disabled in task manager too).
 
Phew, as long as I'm in the ballpark for what the card should get I'm happy - probably won't use 3dm for another 2 years now too heh :)

Thanks to everyone that replied.
 
Back
Top Bottom