Deleted User 298457
Deleted User 298457
Hi folks,
Seeking some divine intervention --- I've ordered some IKEA units, a white 2.4m x 60cm panel, and have some worktop left over from the kitchen job (specifically). My original plan was to make this a bit of a "boot room", in that you can get in and flick your boots beneath the counter space.
The original vision was to move the appliances to the right hand side (face on), but the plumber spurred off the WC radiator for the kitchen plinth heater which has made that a bit more of a thoughtful process - as the appliances would sit 65mm from the wall versus 20mm. 45mm isn't much but there isn't much space to start with!
However I soon realised if I moved the appliances to the right hand side it'd foul the socket and I'd need to move it (not a massive issue)... but also, given I am not having any "down units", if I were to use the worktop as a temporary desk every now and then (the current office will become a bathroom, so we'll be sans one work area for a long while) the exit door would be blocked by any theoretical chair/person working.
I ripped out the cabinet earlier and could finally get accurate measures.
Pic1
You can see the pipe work I'd have to miss if it went this side.
Pic2
Bonus: I was going to rip a hole in the ceiling and insulate. God knows how much is up there, but there is something and that is sufficient for now:
Pic3
Also I fixed the temporary drainage with something a bit more permanent and tidy. Not glued in yet as there isn't enough pipe out of the floor to give me the confidence to stick it straight away
Pic4
View from the hall which I am told shouldn't include washers.
Pic5
So question to the great and the good:
* Is Pic5 a bad enough view that moving them to the right hand side is required? I'd be 'losing' 45mm, have to move sockets, and blocking the door should someone work from in there on the new worktop.
Or
* Keep it as per Pic1, regain the 45mm, allow a desk to be there comfortably without it blocking the rear door, not have to move the sockets, but have the unsightly view as per Pic5?
The main consideration I hadn't considered:
Seeking some divine intervention --- I've ordered some IKEA units, a white 2.4m x 60cm panel, and have some worktop left over from the kitchen job (specifically). My original plan was to make this a bit of a "boot room", in that you can get in and flick your boots beneath the counter space.
The original vision was to move the appliances to the right hand side (face on), but the plumber spurred off the WC radiator for the kitchen plinth heater which has made that a bit more of a thoughtful process - as the appliances would sit 65mm from the wall versus 20mm. 45mm isn't much but there isn't much space to start with!
However I soon realised if I moved the appliances to the right hand side it'd foul the socket and I'd need to move it (not a massive issue)... but also, given I am not having any "down units", if I were to use the worktop as a temporary desk every now and then (the current office will become a bathroom, so we'll be sans one work area for a long while) the exit door would be blocked by any theoretical chair/person working.
I ripped out the cabinet earlier and could finally get accurate measures.
Pic1

You can see the pipe work I'd have to miss if it went this side.
Pic2

Bonus: I was going to rip a hole in the ceiling and insulate. God knows how much is up there, but there is something and that is sufficient for now:
Pic3

Also I fixed the temporary drainage with something a bit more permanent and tidy. Not glued in yet as there isn't enough pipe out of the floor to give me the confidence to stick it straight away

Pic4

View from the hall which I am told shouldn't include washers.
Pic5

So question to the great and the good:
* Is Pic5 a bad enough view that moving them to the right hand side is required? I'd be 'losing' 45mm, have to move sockets, and blocking the door should someone work from in there on the new worktop.
Or
* Keep it as per Pic1, regain the 45mm, allow a desk to be there comfortably without it blocking the rear door, not have to move the sockets, but have the unsightly view as per Pic5?
The main consideration I hadn't considered: