2 slot Fan in XC cube?

Associate
Joined
14 Jun 2005
Posts
41
Location
London town
Can I use 2 slot fan in my XC cube?

Hi just a query before I shell out nearly £200 on an AGP card...

I've an XC Cube EZ65-II and want to know how to install a twin fan slot AGP card.

229076293_868bfdc52d_b.jpg


229075919_005c6bedda_b.jpg


The AGP slot is right by the edge of the machine and there's steel in the way where I imagine the twin slot would slip into.

Has anyone managed workarounds for this?

I've a P4 3.2 Ghz northwood (single core, 32bit) and would hapilly go to the PCI-Express if my CPU wasn't going to be dated aswell.
So I reckon the GeForce 7800 GS (with 7900 core) is the fastest AGP card available and will push it up. (Currently on All in Wonder 9800 Pro).

Any ideas or alternative suggestions?
Thanks

Seb
 
Last edited:
Thanks for the advice on that card.
Just need to be sure that its a one slot fan.

Yes, my XC fan speeds up but mainly once I've taxed the cpu with something like encoding videos. Never happens in games.

I also leave the case off anyway as its under the workbench legs (as in photo) and out of the way (hopefully) of my legs. Not kicked it yet and its been there for over a year now.

If I put the case back on, the cpu fan does make slightly more noise as its working harder due to the case grill and slightly higher temp due to the contained heat.

Hope this answers your question!
 
Just a thought, have you checked out the BIOS?
You can set the fan to stay at full speed (as it goes when its first turned on after being plugged into the wall socket) and see if it reaches 3000rpm.
I've got some temp settings set so when it reaches 65C it goes up.

As for Qs, I take it the 7600GT is the best single fan AGP card (ATI & Nvidia) I can get then are there any good comparison sites I can check performance tests so I know what to expect?

Ta.
 
Back
Top Bottom