Permabanned
- Joined
- 15 Dec 2008
- Posts
- 3,417
As above.... Moved to water cooling from this...
Didn't worry myself with temps or voltage as the cold reduces there effect on the chip but want to play it a bit safe now I'm on water.
1.45v ( Load voltage ) good for 24/7?? Not really concerned about reducing the chips life span but don't want it to degrade either.
And what about safe temps? Used to run at around -30c loaded under phase ( Evap was -46c so 15c delta between CPU and EVAP temp seem about right )
Also, how do I get an MSI board to drop the voltage during idle?? As soon as I set Vcore manually Intel speed step doesn't seem to work with it enabled???
To reduce Vcore would I need to push the PLL up or down?
Didn't worry myself with temps or voltage as the cold reduces there effect on the chip but want to play it a bit safe now I'm on water.
1.45v ( Load voltage ) good for 24/7?? Not really concerned about reducing the chips life span but don't want it to degrade either.
And what about safe temps? Used to run at around -30c loaded under phase ( Evap was -46c so 15c delta between CPU and EVAP temp seem about right )
Also, how do I get an MSI board to drop the voltage during idle?? As soon as I set Vcore manually Intel speed step doesn't seem to work with it enabled???
To reduce Vcore would I need to push the PLL up or down?