** 24HR ONLY DEAL - KINGSTON 8GB 1600MHz GENESIS DDR3 KIT ONLY £49.99 Delivered! **

[Gibbo]

Hi there


For 24hrs ONLY (The Remainder of TWO) were offering the fantastic Kingston HyperX Genesis 8GB 1600MHz Sandybridge approved kit for just £49.99 Inc. VAT and if your a loyal forum member, you get FREE shipping too!



Kingston HyperX Genesis Grey 8GB (2x4GB) DDR3 PC3-12800C9 1600MHz Dual Channel Kit (KHX1600C9D3X2K2/8GX) @ £49.99 inc VAT

Kingston's KHX1600C9D3X2K2/8GX is a kit of two 512M x 64-bit 4GB DDR3-1600MHz CL9 SDRAM (Synchronous DRAM) memory modules, based on sixteen 128M x 8-bit DDR3 FBGA components per module. Each module kit supports Intel® XMP (Extreme Memory Profiles). Total kit capacity is 8GB. Each module kit has been tested to run at DDR3-1600MHz at a low latency timing of 9-9-9-27 at 1.65V. The SPDs are programmed to JEDEC standard latency DDR3-1333MHz timing of 9-9-9 at 1.5V. Each 240-pin DIMM uses gold contact fingers and requires +1.5V.

Model Name: KHX1600C9D3X2K2/8GX
Main Board: INTEL
System: DESKTOP
System Type: DDR3
M/B Chipset: INTEL P67
CAS Latency: 9-9-9-27 2N
Capacity: 8GB (4GBx2)
Speed: DDR3-1600 (PC3-12800)
Test Voltage: 1.50-1.65V
Registered/Unbuffered: Unbuffered
Error Checking: Non-ECC
Type: 240-pin DIMM
Master Pack Dimension: 8.5 x 5.5 x 0.62 In (L x W x H)
Master Pack Weight: 0.26 lbs
Black PCB
Warranty: Lifetime


Was [£59.99] Inc. VAT

Only £49.99 inc VAT.

ORDER NOW

 

[Gibbo]

Each module kit has been tested to run at DDR3-1600MHz at a low latency timing of 9-9-9-27 at 1.65V

I've just realised to run at 1600mhz they need 1.65 volts. My plans.... ruined!

They run fine at 1.50v

Were building 1000+ plus systems per month with these with voltage at 1.50v and we've not had one single unit faulty or unable to do this yet.

These kits are pretty awsome!

 

[Gibbo]

How many did you sell Gibbo?

Over 100 kits yesterday.

 

[Gibbo]

I regret not snapping these up, any ideas when they'll be at that price again?

Hi there

I shall place them on TODAY ONLY over the weekend, shall put just 100 units up for grabs, will go live tomorrow 9am.

 

[Gibbo]

I am pretty sure that ocuk say it was stable at 1.5V (why push memory up to 1.6V) look like u need to notch up vcore instead of memory ?

We find with the Kingston / Corsair the sweet spot for voltage is 1.40 - 1.60v, it varies from module to module, what motherboard etc.

 

[Gibbo]

Ah ok fair point Gibbo. So, I can try mine 1.40, if unstable, try push up once notch as a time all the way up to 1.60 on the ram until it get stable. Thanks Gibbo.

Yup.