3200+ winchester help

[rickfin]

Hi! I'm currently running Amd athlon 64 3200+ with the stock cooler(boxed edition)@10x240 with 1.536 v. Temps are 40+ idle and 54-55 full load. I just ran Prime 95 torture test small FFT's for 19 hours 11 minutes with no errors or warnings before I stopped it manually. So I think it's quite stable. Can you suggest new heatsink and fan for me? Is it safe to run with those volts on long time period?

 

[rickfin]

Have you tried dropping the volts a little? You might get away with 1.45/1.5. Although the voltage you're using is fine, its obviously better to have lower volts if poss.

In the bios the voltage is @1.5125 but cpu z says it's 1.536 or actually it changes all time reading is 1.536 or 1.520. Before this I had 1.5 v according the bios and 1.520 according cpu z, but it wasn't stable(Prime 95 restarted the computer after 2,5 hours). Why the bios shows different values than cpu z or everest? Is it dangerous that the cpu z shows two different values for volts?
I have Freezer 64 pro coming on the mail.