360mm Radiators

BeeP · 17 Feb 2011 at 23:03

I need a new 360mm rad as my trusty PA120.2 is just too thick for my new case.

Are there any real stand out rads that are a must buy or is it like most where it is only a few degrees?

I was considering the XSPC RS360 Radiator or maybe a Swiftech MCR, the XSPC is slightly shorter & makes me feel safer for fitting, is there a big difference though. Both are about 35mm thick.

Thanks for any help in advance.

Nibbles · 17 Feb 2011 at 23:26

black ice stealth? fantastic rads tbh. thinner than normal if i recall i think theyre about 4cm thick instead of 6-7 for a normal rad ill try to find a link but OcUK did have them in stock a while back. edit: checked ocuk they only stock the fat one

here it is: http://www.hwlabs.com/index.php?option=com_content&view=article&id=27&Itemid=24

i hope linking to a manufacturer is allowed :/

BeeP · 17 Feb 2011 at 23:54

Ta, looks like it is less than 30mm

Forgot to mention, I'm currently only cooling my Q6600 @3.6.

Might add my 5850 into the loop but tbh not really that fussed just now.

Nibbles · 18 Feb 2011 at 00:06

a triple rad will easily cool a cpu and gpu with half decent fans (y)

Deleted member 70857 · 18 Feb 2011 at 10:28

I have the swiftech rad with built in reservoir. It cools my AMDx6 and 2 GTX 260's fine. Loads are never above 50C

Bubo · 18 Feb 2011 at 11:48

What case? If it is an 800/700D with the recessed top rad mount, you can jigsaw this out and put a rad grill in its place. This gives you back the 5 mill or so the recess takes up.

BeeP · 18 Feb 2011 at 11:57

I bought the new white raven case, rad mounds at the bottom & my gfx card (5850) is about 10.5" long, apparently that leaves about 40mm for a rad.

To be honest I've not checked, I know the 35mm ones will fit though.

360mm Radiators

Deleted member 70857

Deleted member 70857