3d print thread from cura on mayalan m200

[Gregrb]

I have tweaked many settings and getting fairly nice prints. But I have a part with a vertically printed m5 thread that is mostly printing well but one side has extra plastic/string running all the way up it which should not be there (as perfectly designed thread).

I know the part can be perfectly 3s printed as it's a replacement for a part I already had printed inbthe last in a different 3d printer / but with settings for cura I don't have.

What final setting tweaks can be made to fix this. The part will then have its own second hand screw with internal thread to match made. My 3d printer is MALYAN M200 V2 (Also know under Monoprice re branding)

Photos:

20221001-202106 hosted at ImgBB

Image 20221001-202106 hosted in ImgBB

ibb.co

20221001-202127 hosted at ImgBB

Image 20221001-202127 hosted in ImgBB

ibb.co

20221001-202116 hosted at ImgBB

Image 20221001-202116 hosted in ImgBB

ibb.co

 

[wafflecart]

I can’t really tell from the pictures because of the colour. But it might be the seam/z seam, you can adjust its position in cura or prusa slicer, might be worth changing that setting to see if it improves it.

 

[Gregrb]

I can’t really tell from the pictures because of the colour. But it might be the seam/z seam, you can adjust its position in cura or prusa slicer, might be worth changing that setting to see if it improves it.

Thanks its in cura, so what seam / z seam setting do you. Suggest I try for best quality to achieve thus thread?