3ghz on stock volts

slap ed · 29 Jun 2007 at 18:57

i think i got a good one 3ghz on stock volts any good ?

Cob · 29 Jun 2007 at 18:58

Sweet!

slap ed · 29 Jun 2007 at 18:59

damn first picture and its blured what have i done wrong ? :confused:

Sean_UK · 29 Jun 2007 at 19:02

Can just about make that out, Opty i take it? If so nice chip yes.

jaykay · 29 Jun 2007 at 19:05

Sweet overclock for a 939 but sadly am2 cpu are overclocking to 3.5ghz :eek:

and 3.3-4 regularly.

Will_3rd · 29 Jun 2007 at 19:07

not bad, now for some Orthos

slap ed · 29 Jun 2007 at 19:11

yes opty 180 the chip was so cheap i couldn't resist . i sold my 4600x2 and it just about covered the cost so not so bad . but well impressed with the cpu , it will super pi at stock volts at 3ghz but fails occt after 8 mins . unfortunately its time is limited as i already have a dfi 680i board and waiting for a quad

slap ed · 29 Jun 2007 at 19:15

have i set the res wrong ?

Azagoth · 29 Jun 2007 at 19:30

Just click the image, it's fine and perfectly readable here.

carlazai · 29 Jun 2007 at 20:14

Nice one mate, try for some more now. These chips will always give you some more. Always wondered if Intel deliberatly underclocked them so the enthusiast market would go crazy for the,

Netvyper · 30 Jun 2007 at 09:30

carlazai said:
Nice one mate, try for some more now. These chips will always give you some more. Always wondered if Intel deliberatly underclocked them so the enthusiast market would go crazy for the,

Intel in underclocking AMD chip shocker! :eek:

BAMBI · 30 Jun 2007 at 10:16

What happens if you give it a little more juice???

P373 · 30 Jun 2007 at 11:12

nice chip. My 939 3800x2 does 2.8 on stock volts, orthos stable but after that im limited by my boards voltage controls, which only go to 1.4. Can only boot into windows at 3ghz and one core fails orthos after a minute.

slap ed · 30 Jun 2007 at 12:41

i will try and see what i can get it too on monday , i'm on nights at the mo bummer

. plus i am only using the stock cooler at mo . whats the best result on air for 939 chip on air ?

pompeyboy · 1 Jul 2007 at 01:12

iv seen 3200 on air with new e6 opteron 165, looking at your screeny id say up your volts m8, a lot of people are hitting 3ghz on air but not stable unless upping volts to 1.4-1.45, if i get time ill see what i can get my new stepping 170 to

.

pompeyboy · 6 Jul 2007 at 19:00

currently sat here on 2900mhz stable with new opteron 170

first attempt got me 2800mhz stable then a little ram adjustment got me this, im sure ill get 3ghz stable no problem soon

moogie · 6 Jul 2007 at 21:23

bagged an opty 175 couple of weeks bag
sitting at 3ghz orthos stable, straight in at 2.8 and jumped straight to 3g

may try and push a little further

slap ed · 7 Jul 2007 at 04:52

hey pompeyboy and bbspeed what volts you at now ?and what are your temps please ? i have got a week off now so i will see what i can get out off mine although this damn asus a8n-sli 32 deluxe board bios is a mare . trying to work out the memory divider on it , i was alright upto 250 fsb as i have pc4000 ram but to go higher i am gonna have to put it on a divider . lol noob hey

moogie · 7 Jul 2007 at 06:07

1.3625v temp lows 40's mid 50's under full load

pompeyboy · 7 Jul 2007 at 07:07

slap ed said:
hey pompeyboy and bbspeed what volts you at now ?and what are your temps please ? i have got a week off now so i will see what i can get out off mine although this damn asus a8n-sli 32 deluxe board bios is a mare . trying to work out the memory divider on it , i was alright upto 250 fsb as i have pc4000 ram but to go higher i am gonna have to put it on a divider . lol noob hey

Try this-cpu is at 1.35v, Set ram to 166 divider, x10 multi,280fsb,also is that ram g.skill pc4000? if so i found 2.7v and all settings on auto apart from 2t,ras to cas=5 and ras precharge =5, i then used clock gen to up to 2900mhz and ran orphos for 12 hours

edited moved mem setting ras to cas and precharge to 4 and 1t,