4200+ Overclock help

[J273]

Ive just bought this chip ....Upgraded from a opteron 144 which i had @ 2.4ghz

id like to clock this chip a little to say 2.6 if possible

Im running a dfi lanparty

If i change the

FSB FREQ = 240

LDT /FSB = X3

CPU / FSB = X11

And up the vcore to 1.4

what would i need the ram divider set too?

3/4

Thanks

 

[J273]

try and make the ram run at stock or just above, does your board give you the current DDR speed?

Hmm not too sure about that....where would i find that ?

Thanks

 

[J273]

fsb - 265
ldt ratio - x3.0
ldt width - 16 16
cpu/fsb - x9
pci exp - 100mhz
cool n quiet - disable
cpu startup - 1.425v
cpu vid control - 1.425
cpu special control - auto
ldt voltage - 1.3v
chipset voltage - 1.5v
dram voltage - 2.6v

dram config:-
dram freq set (divider's) - 133=ram/fsb:03/04
cpc - enable

Ram cas latency - 3


^^^Thats what i had with my opty 144 which i got the info from here...so thats what im working off really

03/04 divider is 199mhz which is pretty bang on with the ram

 

[J273]

Thanks guys.....ill have a go in a bit

Sorry may be a dumb question but whats 4x HT on a dfi board ?

Thanks