4890s Fan Profile Fix/Guide ?

[ViRuS2k]

Got 2x 4890s yesterday.

got them tweaked and setup at 985/1100 respectivly
with a 85% fan speed, crysis load temp 73c 1.4v gpu volt.

now here is my question anyone know the best way to set up a fan profile for both cards when they enter 3d the fanspeed goes from auto to 85% constantly then when back out of the game they return to auto fanspeed.

cheers for the help

 

[kmufc77]

i would like to know this aswell,the only program i know is rivatuner i think

 

[twist3d0n3]

use rivatuner to set up overclocking profiles, and set up a fan profile for 2D and 3D modes.

Use the launcher tab to setup the launching aspect (it's very simple, you'll see which card you've selected and then a series of drop down menus to get things to kick in when you've assigned them).

setup the scheduler tab so that you get things kicking in when 'hardware acceleration' is detected, choosing a threshold point to launch (i usually use 0.5).

^ to get hardware acceleration to be detected, you must be running hardware monitor, and make sure it's displaying hardware acceleration. there's a little orange ball thing next to the hardware acceleration graph, click that and it'll then detect 3d games and do all that stuff automatically.