5000x build 2021
- Thread starter Craig_d1
- Start date
Nice one. Well finally worked out everything so need to upload a few pics.
https://i.imgur.com/yancTZV.jpg[/img]']
Ok, started by stripping the 5000X back and removed the front fans and installed some QL120's
https://i.imgur.com/lY6VBWV.jpg[/img]']
I got Rog Strix B550 E-gaming, put cpu, ram and nvme on before putting in case. remember for the nvme to but the little riser fitting on before fittling nvme. i peeled the plastic cover off the nvme also, peeled the cover of thermal strip on back of the heat spreader and screwed down..Read enough of other people leaving the plastic/paper nvme cover on
Thermal paste spread using a spatula on the cpu (5800X) and attached the aio..bit fiddly hooking on but all connected. I'd got a h150i pro xt, and initially took off the fans and put on the fans that came with the case, the SP120 Elite's, but decided to looked a bit dark on top with the QL's, so swapped again for full QL120's
a couple of the front case connectors next. Found the aio a bit tricky as the the connector that controls pump goes onto board, which was 4 min, but connector only 3 pin. Did ask for help, and Dr. DI was very kind to help me straight away. Much appreciated
Tested power and fans etc before putting gpu you.
On the back, case came with a lighting node core and a pwm fan hub. both require a usb input which is a bit tricky. Board comes with 2 inputs, 1 being used by the aio. i ended up unsrewing the pwn fan controller from case and using a commader pro. This allows the front 6 fans be plugged into the lighting node core, the 3 rgb from the aio go into the other lighting node core that came with case, the fan speeds on aio are plugged into aio, and the 6 front get plugged into the commander pro. Then some cable management i hope I explained that if anyone doing something similar.
Without the commander pro, I have no idea how I was going to do it with the limited usb connectivity on the board...think 2 is fairly standard
Anyway, bit of cable management, please don't be too harsh, 1st timedoing it with all the fans etc, then a little internal door that closes and hides it all
https://i.imgur.com/o1mG93G.jpg[/img]']
https://i.imgur.com/0VgqOHG.jpg[/img]']
https://i.imgur.com/hUuibPV.jpg[/img]']
Finally turn on again with everything back on. with Ram, I have 2x16gb, and bought 2 light enhancement kits just to fill all the slots. Know it's a waste of £30, but completes the look I guess. When installing, installed real Ram in 2nd closest to cpu 1st, then furthest away..so A2 and B2. From reading this is the way instruction tell to install, and in that order...
Other thing I did was open a schematic of the motherboard on a laptop, as the instructions that come with the mobo...well, good for kindling in a fire but that's about it
Last edited:
That's as far as I've got so far, I've just downloaded a windows 10 install onto usb stick, so now going to hook everything up and see if I've done everything correctly. Fingers crossed the mobo recognises the cpu, otherwise I'll have to flash the bios, and that it then boots
Cheers.
Plugged into monitor and turned it on. Luckily booted up no problem. Cpu recognised by mobo so no update required. Took a sec to find the xmp profile in bios, but sorted, and just installed windows 10 home. Everything seems ok so far
Just not used to having a pc where I dont have to wait a min or more before it decides to respond
Very happy
Plugged into monitor and turned it on. Luckily booted up no problem. Cpu recognised by mobo so no update required. Took a sec to find the xmp profile in bios, but sorted, and just installed windows 10 home. Everything seems ok so far
Just not used to having a pc where I dont have to wait a min or more before it decides to respond
Very happy
I agree
, but busted budget already. I did have the black 011D XL, which I got as a package deal with the corsair RM1000X, but then when saw the 5000X for £120 incl. shipping, thought that would save me £60. I bought the strimmer cables for my b'day too , but have hidden them till xmas before my wife goes nuts. Not sure about the gpu strimmer, as the adaptor nvidia supply is pretty dire, so strimmer will still be 3-4 inches away from card, so doubt will look good. mobo one will be fine though. My son wants a pc now, so may get another build chance(he's putting b'day, xmas and savings towards). Though may tell him depends on gcse results too..that way can see what the next series of gpu's are and how much they'll costYes, front and front side are both intake, with top aio fans exhausting. back of case is a lot of triangle large holes so wanted positive pressure to insure are blows outwards, not being sucked in. If I put my hand at the back I can feel the air being pushed out. Was a bit of an effort getting the side shroud off though for side fans, but think was worth it. Pc sits on desk next to me, so can't really see front fans, and mainly see edge of top fans(which is nice too)..side ones are the part piece though. ...haven't peeled wrap off glass yet except on back...we're going to be moving house so thought bit of protection wont hurt
It's a Corsair 5000X. Just checked prices. OCuk £185 atm, though seen for £137 in black, £127 in white(black was £127 2 days ago). I switched fans out and added more(got 9 QL120's in there)...comes with 3 SP120 Elite's in front. Just added gpu strimmer to tidy up a bit..waiting for adaptor so can link it in with the ICue software. Using armoury crate at mo with it plugged directly into a argb socket on board
Finally got round to adding the strimmer cables I bought ages ago. Not perfect, and I need to get a cable so I can control them through ICue, but looks a bit cleaner than the back cables, esp the gpu cables. Also forgot to turn on the 'Geforce RTX' logo on the gpu. Will update photo later when it gets darker...too many reflections now
