600T Window Panel Fans

Quint · 19 Apr 2011 at 20:48

Who here has bought one of these, how have you connected the fans., I can't remember how many cables there are in the case to connect them?

Which 120mm fans do you recommend (without LED please), nice and quiet.

Anyone got photos of theirs?

http://www.overclockers.co.uk/productlist.php?groupid=701&catid=57&subid=4

jlss · 21 Apr 2011 at 22:43

Been looking at that window side panel myself, looks good if only for the extra fan's.

I'm sure there is 4 connectors for the fan controller, but i'm not sure if it will take 4 extra fan's.

Quint · 22 Apr 2011 at 08:46

ordered side panel and 4 fans...we'll see tuesday

jlss · 23 Apr 2011 at 18:05

Rodneypooleg said:
ordered side panel and 4 fans...we'll see tuesday

Don't forget the pics

Quint · 23 Apr 2011 at 22:02

You'll get some don't worry

R-G · 25 Apr 2011 at 11:05

Another option I'm looking at is buying a 230mm fan and installing that at low rpm (900) on the side instead. (Easy enough to create a fitting solution for it using thin aclylic and connecting to 4 corner boltholes) round about 130 CFM and low noise.

Failing that anyone know of a 240mm fan on the market (Have looked, can't find)

Plan is to have
Front-200mm Intake, Side-230mm Intake, Top-200mm Exhaust,
2x570 Graphics Reference design - Exhaust back, 1x H70 Hydro-Exhaust (Push/Pull) back,

Should create a positive Pressire.... by math.

Quint · 26 Apr 2011 at 11:49

EniGmA1981 · 26 Apr 2011 at 12:32

I'd recommend the clear tri-cool fans

I've just put a clear (but 230mm and lit) fan in the mesh panel of my 932 and it looks better than the black fan as you can (to a point) see through to the components

the tri-cools on low would provide a nice intake and they're near-silent at that speed!!

Though those fractals do look nice

Shilz · 26 Apr 2011 at 13:14

^^ Oooo very nice!

I would use the extra PCI-E instead of the non-modular one...

would look a lot better!

jlss · 26 Apr 2011 at 15:59

Looks good Rodneypooleg thanks for the pics.

Does the mesh insert have a filter?

Deluxe1 · 26 Apr 2011 at 17:26

No filter, it does bring in a lot of dust thats with only 2 fans on mine.

Reedweaver · 1 May 2011 at 09:25

Do you get the mesh as well as the window?

Troezar · 1 May 2011 at 09:30

Yes it says as much on the description

jlss · 1 May 2011 at 10:12

Reedweaver said:
Do you get the mesh as well as the window?

Yes you do, but no filters for the fans.

I'd make some or buy some or your case will be full of dust.

Pretty stupid of Corsair tbh.

Reedweaver · 1 May 2011 at 10:23

I will see what my temps are with my new 600T when I finish the build.

I've replaced the front standard fan with a 180mm Silverstone Air Penetrator. Also the top fan with 2x 120mm Scythe Kaze 1900RPM. The rear with a 38mm Scythe Ultra 3000RPM fan.

I needed to drill some new holes in the fan so I could use the standard case mountings. Also the new front fan is too wide to utilise the HDD mounting at the front. I'll probably use a 5.25" adapter to mount my HDD.

What sort of temp decreases are you seeing with this side fan setup?

Reedweaver · 1 May 2011 at 10:46

The 600T fan controller can handle 6 watts per channel. (12v)

So you can have 0.5A per channel.

Am I right in saying the one channel could run 4x Fractal Design 120mm fans?

0.72watts each x4 = 2.88watts total.