Hey guys 
(Should this rightly be in its own thread or should I have posted this in an already existing one? If it's the latter then sorry.)
I used to have my 6950 at stock speeds with the unlocked shaders, so I clock it at 800 and 750 with 1.06 volts for folding. This gave me solid temps with low fan speeds - kool and the gang.
But today I thought I may as well go for the stock 6970 speeds, as I don't have a heater in my new room, so when it's cold I can just run furmark (400 watts heats the room up in around 10 mins).
But for some reason I now can't adjust the voltage, and f@h is suffering with the higher temps. 1.175v and there is no budging it. Unlocked all voltage control in MSI Afterburner, disabled and re-enabled Overdrive in CCC, adjusted MSIAfterburner.cfg - still no luck.
Does anyone have any clues as to what my next steps should be? Sorry if I left any details out. And as always, thanks for the help.
(Should this rightly be in its own thread or should I have posted this in an already existing one? If it's the latter then sorry.)
I used to have my 6950 at stock speeds with the unlocked shaders, so I clock it at 800 and 750 with 1.06 volts for folding. This gave me solid temps with low fan speeds - kool and the gang.
But today I thought I may as well go for the stock 6970 speeds, as I don't have a heater in my new room, so when it's cold I can just run furmark (400 watts heats the room up in around 10 mins).
But for some reason I now can't adjust the voltage, and f@h is suffering with the higher temps. 1.175v and there is no budging it. Unlocked all voltage control in MSI Afterburner, disabled and re-enabled Overdrive in CCC, adjusted MSIAfterburner.cfg - still no luck.
Does anyone have any clues as to what my next steps should be? Sorry if I left any details out. And as always, thanks for the help.