Hi,
Have 4 x 8 Pack Dark Pro 3600 8GB DDR4 sticks in my ASRock X570 Taichi. Had some issues running all four previously - each pair would test fine on XMP settings and 1.35v, but would get some errors in memtest86 using all 4 until I upped the ram voltage to 1.375v.
PC has been fine for a good few months then last couple of days it has been rebooting without warning with only "unexpected reboot" in the windows event logs and no crash event or dump file saved. Even went through windows trying to boot a few times and go into windows recovery mode.
Even restarted during a run of memtest86 off a usb stick. Last try it went through all 4 passes and reported several memory errors. Unclear why it's now giving issues again - is something degrading?
Again, both pairs test out fine on XMP settings with 1.35v. Pc seems stable and not had any crashes when using a single pair of sticks.
Before I try pushing the voltage up anymore, what's the safe voltage for the 8 Pack 3600 sticks?
I have my old 3700X in an MSI B450M Mortar Max board with 4 x corsair Vengeance LPX 3200 8GB sticks and that tests fine. Tried the 8 Pack mem in that and with 2 sticks using XMP no issues, but won't post when I try all 4 - although not played around with any voltage settings on that as yet. May also try the 4 3200 sticks with the Taichi as a test as well.
Have 4 x 8 Pack Dark Pro 3600 8GB DDR4 sticks in my ASRock X570 Taichi. Had some issues running all four previously - each pair would test fine on XMP settings and 1.35v, but would get some errors in memtest86 using all 4 until I upped the ram voltage to 1.375v.
PC has been fine for a good few months then last couple of days it has been rebooting without warning with only "unexpected reboot" in the windows event logs and no crash event or dump file saved. Even went through windows trying to boot a few times and go into windows recovery mode.
Even restarted during a run of memtest86 off a usb stick. Last try it went through all 4 passes and reported several memory errors. Unclear why it's now giving issues again - is something degrading?
Again, both pairs test out fine on XMP settings with 1.35v. Pc seems stable and not had any crashes when using a single pair of sticks.
Before I try pushing the voltage up anymore, what's the safe voltage for the 8 Pack 3600 sticks?
I have my old 3700X in an MSI B450M Mortar Max board with 4 x corsair Vengeance LPX 3200 8GB sticks and that tests fine. Tried the 8 Pack mem in that and with 2 sticks using XMP no issues, but won't post when I try all 4 - although not played around with any voltage settings on that as yet. May also try the 4 3200 sticks with the Taichi as a test as well.