8 pack need your help overclocking 4930k

rpggamesplayer · 4 Oct 2013 at 21:25

Hey dude just got a new system
4930k
Asus rive
Mushkin redline enhanced 2133 4x4gb total of 16gb quad Chan
Gtx 780
Samsung 840 pro ssd
Water cooled d5 pump 360 monsta rad and 480 phobeya 60mm

So far stress testing with standard memory on auto 1333mhz
With a multi of x45
Vcore 1.416v under load idle vcore 1.424v
Prime small ffts highest core temp 77c any voltage under bsod
Whea error windows 8.1
Eist disabled
C states disabled
Cpu pll auto
Only been running for 30 mins so far
Does this look right
Llc is high as it dosent like medium or regular

Is this voltage safe 24/7 and temps

rpggamesplayer · 4 Oct 2013 at 22:48

One Core gave error on prime test after a hour, should I go higher on voltage or go down to 44 on the multi what would you do

8 Pack · 5 Oct 2013 at 01:07

You should stop prime!!! and just use your PC for stability testing.

No 4930K I tested needed more than 1,3 for 4.5ghz stable. Are you sure your mems are not throwing up the errors. Set em up at 2133mhz.

rpggamesplayer · 5 Oct 2013 at 16:13

Yup I set them at 2133 same thing, I have a opertunity to send the Cpu back to retailer for a refund as the box was opened when I received it, I might order one from overclockers, 1.35v is giving me a stable 4.4ghz

Ok same thing is happening at 4.4ghz

i think there's something wrong with memory possibly my vtt vcc are both at 1.1v i have no idea why after 2 hours of stress it restarts pc

posted in to windows and run games benchmarks at 1.28v at 4.4ghz but when stress test small ffts after 2 hours fail and restart all the way up to 1.375v i been going up in 2 increments been at this all night and day memory voltage rated is 1.65v this is how i have it set

rpggamesplayer · 6 Oct 2013 at 02:34

Ok here is the bsod discription you will probably understand this
irq not less or equal storport.sys

8 Pack · 7 Oct 2013 at 22:19

Stop using Prime!! Prime no one cares!!! Use your PC.

Try memtesting RAM first with CPU at stock.

Then test again with RAM at 9-11-11-28 1600mhz but with CPU overclocked.

If this is ok for 2133mhz RAM try VTT and VCCSA 1.15-1.2v. IMC on the chip may be weak.

rpggamesplayer · 8 Oct 2013 at 00:26

Ok I will stop using prime it been a bad habit of mine through diffrent generations of processors, when I fold at home and use something like 3d mark this processor was needing to many volts, I guess I was just so unlucky with it, I have put in a order with you guys fingures crossed I get a much better over clocker, so best way to test stability would just be my usual day to day stuff, I just wontveverything to run smooth as butter, sometimes games stutter if not getting enough volts or getting to much is there any thing you could recommend to help me with that, sorry for all the questions dude but I do look up to you and have been following your stuff on YouTube and on the Asus website

rpggamesplayer · 8 Oct 2013 at 10:03

Ok got my new chip 4.8ghz at 1.34v stable cinebench and 3dmark run in loop for a hour played Bf4 beta for 15 mins so far so good

8 Pack · 8 Oct 2013 at 12:43

Sounds good. 4.8ghz at those volts is a good chip.

rpggamesplayer · 8 Oct 2013 at 13:05

just eating my pack of haribos that came with

4.9ghz Llc high
1.352v idle
1.344v load
Max temp core temp is 70c prime small ffts 5 hours
All i done is up multi to 49
Enabled pll overvoltage
And set llc to high
And added 1.34v on manual Cpu voltage

8 Pack · 8 Oct 2013 at 13:10

Seems fine to me that.

What RAM speed?? 2133??

rpggamesplayer · 8 Oct 2013 at 15:30

yup i have it on xmp 2133 1.65v

8 Pack · 9 Oct 2013 at 21:15

Good, Try tuning 4930K can do very tight sub timings.

rpggamesplayer · 10 Oct 2013 at 00:26

I dontbhave much knowledge on memory tuning, could you guide me through it?

rpggamesplayer · 10 Oct 2013 at 12:13

this is the build first time i went water

rpggamesplayer · 10 Oct 2013 at 12:18

just after white leds for my xspc blocks