900d loop run

thomasjarvis52

thomasjarvis52

thomasjarvis52

Associate
Joined
6 Jun 2014
Posts
123
Location
kettering
hey guys just wanted to make sure this loop run would work okay im planning on my new 900d build




YOUR BASKET
1 x Asus Rampage V Extreme Intel X99 (Socket 2011) DDR EATX Motherboard £339.95
1 x Intel 5820K 3.30GHz (Haswell-E) Socket LGA2011-V3 Processor - OEM (CM8064801548435) £299.99
1 x Corsair Obsidian 900D Super Tower Case (CC-9011022-WW) £274.99
1 x TeamGroup Elite 16GB (4x4GB) DDR4 PC4-19200C16 2400MHz Quad Channel Kit - Black (TPKD416GM2400HC16QC01) £169.99
1 x Plextor M6e M.2 PCI-E 256GB Solid state Hard Drive (PX-G256M6e) £159.95
1 x EK Water Blocks EK-D5 Vario X-TOP Incl. Pump - Plexi £84.95
1 x EK Water Blocks EK-FC980 GTX - Acetal £79.99
2 x EK CoolStream RAD XTX (360) £74.99 (£149.98)
1 x EK Water Blocks EK-RES X3 400 Reservoir £56.99
1 x EK Water Blocks EK-Supremacy EVO (Original CSQ) £49.99
1 x Akasa 5.25" FC Six Channel Brushed Aluminium Fan Controller (AK-FC-08BKV2) £24.98
2 x Monsoon 13/10mm (ID 3/8 OD 1/2) Free Center Compression Fitting Six Pack - Red £24.95 (£49.90)
3 x Corsair SP120 Performance Series High Pressure - Dual Pack (CO-9050008-WW) £22.00 (£66.00)
1 x Mayhems X1 Red Coolant 5ltr £21.95
4 x Monsoon 13/10mm (OD 1/2) Rotary 45° - Red £6.95 (£27.80)
4 x Monsoon 13/10mm (OD 1/2) Rotary 90° - Red £6.49 (£25.96)
1 x XSPC LCD Temperature Sensor (Red) V2 + G1/4" Plug Sensor £5.99
3 x Primochill Primoflex Advanced Tubing 13/10 - Clear £5.99 (£17.97)
1 x BitFenix Alchemy 6pin PCIe Extension 45cm - sleeved black/red/black £5.99
2 x BitFenix Alchemy 8pin PCIe Extension 45cm - sleeved black/red/black £5.95 (£11.90)
1 x BitFenix Alchemy 4-Pin ATX12V Extension 45cm - sleeved red/black £4.99
1 x BitFenix Alchemy 8Pin EPS12V Extension 45cm - sleeved black/red/black £4.99
Total : £1,955.39 (includes shipping : £16.85).





many thanks
 
Last edited:
dreigns said:
ok so I had a measure up don't think your have much luck with a 360 rad down the bottom as I have my psu on the right looking from the front and the max space with it there is 380mm and the rad is 400mm odd even with the psu on the left you then have to get the tubing round it and the wires.

I suppose you could turn the rad round and have the tubing go to the other end and the psu on the left giving room for the rad and a fan
Click to expand...

maybe if I swapped out the rads for something abit thinner maybe ?
 
dreigns said:
ok so I had a measure up don't think your have much luck with a 360 rad down the bottom as I have my psu on the right looking from the front and the max space with it there is 380mm and the rad is 400mm odd even with the psu on the left you then have to get the tubing round it and the wires.

I suppose you could turn the rad round and have the tubing go to the other end and the psu on the left giving room for the rad and a fan
Click to expand...

maybe if I swapped out the rads for something abit thinner maybe ?

YOUR BASKET
1 x EK Water Blocks EK-CoolStream PE 360 (Triple) £49.99
Total : £52.97 (includes shipping : £2.48).

 
spook050 said:
I Just finished a 900D build that pretty much matches your loop plan.

I went for a thin 480mm rad bottom and a thicker 360mm rad top. Both Alphacool.

debkvs1.jpg
Click to expand...
would you be able ot post few more photos please mate ?
 
You must log in or register to reply here.
Back
Top Bottom