• Notice regarding image hosts and attachments. See here.

A dead PC?

Soldato
Joined
7 Mar 2005
Posts
17,481
I've tried some basic elimination such as seperating the memory modules and tinkering with power cables etc, and I'm somewhat stumped as to whats causing this particular machine to reboot continously. It also doesn't help that I lack suitable spares to test with.

It doesn't last more than a few seconds and no BIOS information appears on-screen. The room has a large fan\water-cooler in it so I don't think heat is the issue. The parts are about 3 years old except for the graphics card.

Spec:

Intel Core 2 Duo E6600 @ 2.4Ghz (stock Intel cooler)
2x1GB Crucial Ballistix DDR2-667
LGA775 Gigabyte P35-DQ6
256MB ATI Radeon X800XL PCI-Express
320GB Seagate 7200.10 SATA2
500GB Western Digital WDAAKS SATA2
NEC ND7000 series DVD-RW
Corsair HX 520W PSU

Any ideas?

Thanks for reading :)
 
Now its completely dead. Fans barely move and nothing powers up. Seems like the PSU to me...

Do you think persistent electricity cuts would have affected it? I've been told that this has happened quite a few times.
 
It could be the PSU - it could also still be be a short.

I would opt for building a skeleton setup ouside of the case.

Or you could do a paper clip test on the PSU?

I haven't got a paper clip handy :p

I guess I'll try removing it from the case and report back.
 
You don't have to jump straight to testing the skeleton set up outside of the case - you could try the skeleton set up inside the case first. Just make sure the MB is secure on the risers as well as disconnecting all non-essential components.

Although, if you have already, don't worry, it's best practice with the type of fault you've got...

Already did. And how I have a cut hand :( *curses sharp edged case*
 
Just don't go dripping blood on the MB :p

Otherwise you'll defintely have a shorting problem - and i doubt you would find the irony very funny.

Haha, no I didn't - I hit my upper hand on the drive bay edge.

These ATX power plugs still need a stupid amount of force to unclip. :mad:
 
That's what i love about computers - they like to live on the edge.

Not only do they generate random problems that **** you off but they then push their luck by extracting pain/blood when you try and fix them.

I'm always surprised by the lack of 'I’ve snapped my MB in half – will it have any adverse effects on any other components?' thread titles. (I have done this once – but it my defence the motherboard in question had it coming...)

Well hey, I'm not going to complain if it earns me a living ;)

Same thing happens now that its outside the case. Reboots continously, blank screen.
 
So you’re either a shrink, a doctor, or pc salesman/repair person?

If you’re the third of the above – what’s the verdict? ;)

That’s not sounding very promising – but at least it’s back to rebooting.

Can I just check that you only have the cpu, 1 stick and the gfx connected?

If you have – try a different stick/slot and, if you have one to hand, a different gfx card.

EDIT: Also, eliminate the extension lead if your using one - and also try a different kettle lead.

Doesn't seem to make any difference. I don't have a multimeter to hand to test the PSU, just a voltmeter.
 
The PSU is certainly a strong candidate.

Can you get your hands on a different PSU to test – tomorrow?

If you can you may as well down tools until you get some other components to test – if you’ve tried all of the above...

Probably not. Just submitted an RMA request to Corsair UK for the PSU using the details I've been provided.
 
Wow - your decisive!

It normally takes multiple posts of 'umming and aring' from an OP to make a decsion like that - kudos.

Good luck with it - let us know how you get on.

Lol. I'm not a newbie here to waste time ;) and I borrowed the voltmeter from the owner, I should consider investing in a proper tester..
 
By the sounds of it you have it sussed - i've made threads in the past for confirmation too.

I may have missed something, and I didnt have the spares\pc speaker so asked here for ideas (many hands make light work etc) ;)

Good luck - hopefully the rma process should be less than 2 weeks - Corsiar’s RMA department is in the Netherlands but is, apparently, relatively quick.

I thought they had a UK centre?
 
Not that i'm aware of - but if i'm wrong it won't take long for someone to correct me...

TBH, their turn around is pretty good - some pple have had them back in under a week. It's just the p&p that is a bit of a b*tch.

Hmm...I don't think the owner of this PC will be too happy about that. :p
 
Ahh - I completely missed that it was Ballistix PC5300. Had I seen that, the RAM would have been my first suspect. I had to RMA a set of that for the third time last month - none of them lasted more than a year. Exact same symptom - one day the system just doesn't boot. Lost patience with it so I bought some Corsair and I'm selling the RMA replacement. Seems to be hideously unreliable.

Glad you got it sorted, anyway!

I'll be advising the same is done with this system ;)
 
Thanks for contacting us with your RMA request. We’ve set this up for you and the return details are below. Please write your RMA number on the outside of your package and return it to us in secure packaging within 10 business days. We recommend using an insured delivery method, such as Royal Mail Special Delivery, to protect your contents as Crucial is not liable for items lost or damaged in transit.

Please send to:
Lexar Media
RMA ********
12 Redwood Crescent
Peel Park Campus
East Kilbride
G74 5PA
United Kingdom

Hmm...that was quick. Must be automated.
 
Back
Top Bottom