A question for H100i Push/Pull owners!

neblur

neblur

neblur

Associate
Joined
9 Sep 2012
Posts
103
Location
Glasgow,Scotland.
Hi there I am going to be building a pretty expensive build in around 8 months *still saving :p* And it will be my first time using a closed loop, I plan to use the h100 and the 900D case when it comes out but as i have saw in reviews and videos the H110i only comes with enough screws to mount 2 fan's. I would like to mount 4 in push/pull but being a WC nub i have no idea about screws and such, I had a look online for the specification of the screws they use and found the closest thing. What i want to know is if theses would work " http://www.specialtech.co.uk/spshop...et-Cap-Allen-Head-Screw--Black-pid-13237.html " As im a little worried about bursting the rad and destroying! my new build, I am also from the Uk so if anyone who has a h100 in push pull could recommend a store or tell me where they got there screws from it would be much appreciated!

Thanks again!:)
 
One more thing i forgot to add, I know the ones corsair provide are the right size to mount fan on the underside fine.... Wont they need to be longer to provide clearance for the thickness of the case and 120mm fans?
 
I think you're looking for something like M3 x 30mm screws, provided that your fans are 25mm thick, they should be enough.
 
Not sure, the head might stick out a lot.

You should also remove the link too, as it's a competitor. (Not allowed) ;)
 
*Rich* said:
Not sure, the head might stick out a lot.

You should also remove the link too, as it's a competitor. (Not allowed) ;)
Click to expand...

Oh was not aware, I just cant find them anywhere. Also how would they stick out if they are the same length of the ones with the h100? if you have a h100
in p/p Could you tell me where you got yours at or something like that.
 
Are you going to get any better cooling in that setup then? Only the radiator temp on my H100i doesn't go above 40c. I'm playing Hitman right now on max and it's 33c.
 
Tobes said:
Are you going to get any better cooling in that setup then? Only the radiator temp on my H100i doesn't go above 40c. I'm playing Hitman right now on max and it's 33c.
Click to expand...

Its more about the looks tbh mate, Now have you seen the 900D? the thing is freaking like a house. i want to fill up as much space as possible i might get a 800D but the affect will still be the same. I have seen 800D's with the push setup on a h100 it looks silly =P I just wish i could find the screws =P
 
Haha I have the 650 after deciding the 800 was just too big for me. Plus these are noisy fans when they hit above 2000rpm so I was just inquiring.

Best bet it to email Corsair and if they know you're buying a H100i I can't see them having a problem sending you out some extra screws. I would have thought that the case would have come with some extra screws that would fit. I know my 650 came with loads. The one you have linked to is a alan head though not a Phillips which is what the standard ones are.
 
Tobes said:
MrwNZmhl.jpg

Hmm they are quite long. Just looked at my case screws and none of them come close.
Click to expand...

Hmm thanks for having a look! The alen head wont be a problem as long as they are the same as the ones provided. My Haf X also came with some long ones for my top 2 200mms but they look pretty thin. As for corsair sending me some i highly doubt it, Everywhere i have look for people with the same issue have said they tried on the forms and they listed the screw specs are "The size is 6/32x 1.25in long. " so i really have no clue. I think ill be buying the h100i first with my new build along with some screws and slide a bit of sheet plastic under the screw hole to protect the rad, If it hits then the are ofc to long =P Looks like im going to have a lot of screw by the end of this.......
 
You must log in or register to reply here.
Back
Top Bottom