Abit ip35 pro memory error

White · 9 Jan 2008 at 13:05

I have Abit IP35 Pro with Intel E7650, OCZ 4GB (4x1GB) PC2-6400C4 Dual Channel Platinum Revision 2 XTC Series DDR2 (OCZ2P800R22GK)

I'v tested my memory 1gb at a time with memtest and i have no errors.I put the 4gb in and i get hundreds of errors.What am i doing wrong

does anyone have an abit ip35 pro with ocz 4gb of memory runing,could they help me with settings

Thanks

(cant find my last post

)

Space Monkey · 9 Jan 2008 at 14:39

Have you set the correct voltage for that ram?

Also if you have maybe increase it a little to see if that helps?

Peace

Garyj881 · 9 Jan 2008 at 15:27

When you tested the memory one piece at a time did you also try different slots on the motherboard?

Nelly · 9 Jan 2008 at 15:44

Best place to find out would be here OCZ Forum Support the Ocz Tech's will reply to you within a few hours of posting, they are really helpful & know what their doing.

OCZ 2GB (2x1GB) PC2-6400C4 Dual Channel Platinum Revision 2 XTC Series DDR2 said:
- 800MHz DDR2
- CL 4-4-4-15 (CAS-TRCD-TRP-TRAS)
- Platinum Mirrored XTC* Heatspreader
- OCZ Lifetime Warranty
- 1.9-2.0 Volts
- 240 Pin DIMM
- OCZ Enhanced Latency Technology
- 2.2V EVP**

1) Put the DDR2 voltage to 2.0v
2) Increase the MCH Voltage in the bios by 0.1

If that doesnt work, increase the DDR2 voltage to 2.1v.

Also you may have to slacken the timings to CL 5-5-5-5-15. (CAS-TRCD-TRP-TRAS)

White · 10 Jan 2008 at 12:52

thanks for replys but i did use theses http://www.ocztechnologyforum.com/forum/showpost.php?p=236334&postcount=2 but i had to put 5,5,5 15 settings but can only run 3gb as soon as i put in 4gb i get errors

james32 · 10 Jan 2008 at 13:18

take 1 stick of ram and test each slot with memtest
you could have a bad memory slot.