Hi,
I have a RAM upgrade related query that I hope someone can assist with - I'll do my best to detail everything...
A few months back, I purchased the following bundle from OCUK and overclocked my system to 3.31GHz with the instructions provided.
1 - Akasa 2024-Pin 30cm PSU Extension Cable
1 - Abit IP35 Pro (Socket 775) PCI-Express DDR2 Motherboard
1 - OCZ 2GB (2x1GB) PC2-8500C5 1066MHz SLI-Ready Edition Dual Channel DDR2 (OCZ2N1066SR2GK)
1 - Tuniq Tower 120-LFB CPU Cooler (Socket 478/754/939/940/AM2/LGA775)
1 - Arctic Silver 5 Thermal Compound (3.5g)
1 - OcUK Overclocking Guide - Abit IP35 Pro, Q6600, 2GB OCZ PC-8500, Tuniq Tower, AS5
1 - Intel Core 2 Quad Pro Q6600 "Energy Efficient SLACR 95W Edition" 2.40GHz (1066FSB) - Retail
1 - Antec Three Hundred Ultimate Gaming Case
I currently have 2GB (as described above) and I'm running Vista - the RAM timings are as follows:
DRAM Frequency - 460MHz
FSB : DRAM - 4:5
CL - 5.0
tRCD - 5
tRP - 5
tRAS - 15
CR - 2T
CPU Clock:
Core Speed - 3312.3MHz
Multiplier - x 9
Bus speed - 368MHz
Rated FSB - 1472MHz
If I were to put in another 2GB (of the same memory making it 4x1GB of OCZ PC2-8500c5), which settings will I need to alter / attend to?
I'm purely trying to gauge whether an additional 2GB is a worthwhile cause for my set-up, so your advice is welcome.
Many thanks in advance!
I have a RAM upgrade related query that I hope someone can assist with - I'll do my best to detail everything...
A few months back, I purchased the following bundle from OCUK and overclocked my system to 3.31GHz with the instructions provided.
1 - Akasa 2024-Pin 30cm PSU Extension Cable
1 - Abit IP35 Pro (Socket 775) PCI-Express DDR2 Motherboard
1 - OCZ 2GB (2x1GB) PC2-8500C5 1066MHz SLI-Ready Edition Dual Channel DDR2 (OCZ2N1066SR2GK)
1 - Tuniq Tower 120-LFB CPU Cooler (Socket 478/754/939/940/AM2/LGA775)
1 - Arctic Silver 5 Thermal Compound (3.5g)
1 - OcUK Overclocking Guide - Abit IP35 Pro, Q6600, 2GB OCZ PC-8500, Tuniq Tower, AS5
1 - Intel Core 2 Quad Pro Q6600 "Energy Efficient SLACR 95W Edition" 2.40GHz (1066FSB) - Retail
1 - Antec Three Hundred Ultimate Gaming Case
I currently have 2GB (as described above) and I'm running Vista - the RAM timings are as follows:
DRAM Frequency - 460MHz
FSB : DRAM - 4:5
CL - 5.0
tRCD - 5
tRP - 5
tRAS - 15
CR - 2T
CPU Clock:
Core Speed - 3312.3MHz
Multiplier - x 9
Bus speed - 368MHz
Rated FSB - 1472MHz
If I were to put in another 2GB (of the same memory making it 4x1GB of OCZ PC2-8500c5), which settings will I need to alter / attend to?
I'm purely trying to gauge whether an additional 2GB is a worthwhile cause for my set-up, so your advice is welcome.
Many thanks in advance!
