Adding coolant to an existing setup

[delpy8]

Hi all

At the moment Im running the swiftech H320 and its filled with the Hydrx PM-2 non-toxic coolant, Can someone recommend what would be similar so as not to totally empty and flush out everthing or can I use the stuff below and just add it as Ive got a bottle of this already

https://www.overclockers.co.uk/showproduct.php?prodid=WC-004-MH

 

[daveip]

Your Mayhems H2O should be OK. But it does beg the question, why? This is an AIO and shouldn't need topping up.

 

[delpy8]

Hi daveip the h320 can have radiators and gpu blocks added to it

 

[Hakanese]

Tbh I'd empty and flush any loop. You're best tobuse just 1 make of fluid as that makes sure that there is less of a chance of the fluids reacting with each other and messing up your loop.

 

[delpy8]

QUOTE=Hakanese;25242634]Tbh I'd empty and flush any loop. You're best tobuse just 1 make of fluid as that makes sure that there is less of a chance of the fluids reacting with each other and messing up your loop.[/QUOTE]

Thanks I will just get some swiftech hydx and keep fluid the same

 

[OLDPHART]

Tbh I'd empty and flush any loop. You're best tobuse just 1 make of fluid as that makes sure that there is less of a chance of the fluids reacting with each other and messing up your loop.

+1 better safe then sorry.

 

[Addicted]

Just flush it, the coolant itself is cheap, and it's not worth risking a reaction you don't want.

De-ionised water is also cheap as chips from halfords.

 

[delpy8]

Hi I will flush it and will get another bottle of the swiftech hydx as it's not that expensive

 

[delpy8]

I take it a 473ml bottle will be enough

 

[Hakanese]

You still planning on 2 rads and one of them being a 480 monsta?
I'd get 2 bottles just to be safe. And if it's too much you now have enough for a refill/flush at a later date